SIOUX CHIEF 521-852 SECURE-ALL 2X26 COPPER PLATED 18GA FLAT STUB OUT BRACKET
Product Details
Attributes
Features
Resources
Sioux Chief SecureAll™ Stub Out Bracket, Series: 521-85, 25 lb, Steel, Copper Plated, 26 in L x 2-3/8 in H, Domestic
Sioux Chief's SecureAll copper plated bracket shall be used where necessary to support 1/2, 3/4 or 1 in nominal copper stub outs for water supply lines. Bracket shall be stamped from heavy gauge steel then copper electro-plated and then a clear coat finish applied to reduce corrosion. Bracket shall not have any areas of exposed plain steel. Bracket design shall include extruded holes or notches for additional soldering surface. Bracket design shall also include formed stiffening ribs along top and bottom of bracket for ultimate strength and rigidity.Bracket shall feature nominal 1/2 in holes on 2 in centers, nominal 3/4 and 1 in holes on 4 in centers and nomimal 1/2 and 3/4 in notches on 2 in centers.
- Patent # 7,039,965
- Reduce inventory with one bracket that feature multiple hole sizes and notches
- Stiffening ribs on top and bottom provides ultimate rigidity
- Heavy ga copper plated steel
- All hole and notches are extruded for maximum soldering surface
- Heat the tube, not the bracket
- 24 in stub bays
- Wear gloves and eye protection when handling metal hanger strap to avoid injury
- Secure bracket to studs using nail or screw (not provided)
- Clean and prepare copper stub out for soldering
- Insert copper tube into pipe hole, apply flux, heat copper tube not bracket when applying solder
- 18 ga steel
Product Details
Sioux Chief SecureAll™ Stub Out Bracket, Series: 521-85, 25 lb, Steel, Copper Plated, 26 in L x 2-3/8 in H, Domestic
Sioux Chief's SecureAll copper plated bracket shall be used where necessary to support 1/2, 3/4 or 1 in nominal copper stub outs for water supply lines. Bracket shall be stamped from heavy gauge steel then copper electro-plated and then a clear coat finish applied to reduce corrosion. Bracket shall not have any areas of exposed plain steel. Bracket design shall include extruded holes or notches for additional soldering surface. Bracket design shall also include formed stiffening ribs along top and bottom of bracket for ultimate strength and rigidity.Bracket shall feature nominal 1/2 in holes on 2 in centers, nominal 3/4 and 1 in holes on 4 in centers and nomimal 1/2 and 3/4 in notches on 2 in centers.
Attributes
Features
- Patent # 7,039,965
- Reduce inventory with one bracket that feature multiple hole sizes and notches
- Stiffening ribs on top and bottom provides ultimate rigidity
- Heavy ga copper plated steel
- All hole and notches are extruded for maximum soldering surface
- Heat the tube, not the bracket
- 24 in stub bays
- Wear gloves and eye protection when handling metal hanger strap to avoid injury
- Secure bracket to studs using nail or screw (not provided)
- Clean and prepare copper stub out for soldering
- Insert copper tube into pipe hole, apply flux, heat copper tube not bracket when applying solder
- 18 ga steel