GRUNDFOS 96654378 1.5HP 230V 1PH CI CIRC PUMP UPS75-69
Product Details
Attributes
Features
Resources
Grundfos, 96654378, Circulator Pump, 3-Speed, Series: UPS, 20 to 170 gpm Flow Rate, 3 in Flange Inlet, 3 in Flange Outlet, 22.64 ft Maximum Head, 1250 W Power, 230 VAC, 4.85/5.2/5.8 A, 60 Hz Frequency, 1 ph, 145.04 psi Maximum, 3450 rpm Motor, 304 Stainless Steel Impeller, 32 to 104 deg F Ambient, IP44 Enclosure, Thrust Bearing, 13.78 in W x 14.25 in H Dimensions
Grundfos large UPS is a canned rotor, centrifugal pump for circulating water in heating systems and smaller air conditioner systems in commercial buildings. These pumps are based on glandless pump or canned rotor technology. The pumped liquid cools and lubricates the motor and rotating parts. Large UPS circulators are typically used in commercial building like schools, hospitals and office buildings for circulating domestic hot water, heating water and air conditioning fluid. The name UPS stands for the German Umwelts Pumpen Selektra, directly translated as circulator pumps selective. S for Selektra indicates that you can select between three speed settings.
- Quiet operation
- Maintenance-free
- Easy to install
- Small profile (1-piece vs 3-piece)
- Seal less, which eliminates worries about hot water leakage
- Pumped water lubricates the shaft and bearings so there is no oil to leak
- No couplers to change
- Wet rotor design
- Terminal box or Line cord models
- UPS pumps have a 2 or 3 speed switch, which increases the comfort level for the application
- Cast iron housing
- GF 80 flange connection
Product Details
Grundfos, 96654378, Circulator Pump, 3-Speed, Series: UPS, 20 to 170 gpm Flow Rate, 3 in Flange Inlet, 3 in Flange Outlet, 22.64 ft Maximum Head, 1250 W Power, 230 VAC, 4.85/5.2/5.8 A, 60 Hz Frequency, 1 ph, 145.04 psi Maximum, 3450 rpm Motor, 304 Stainless Steel Impeller, 32 to 104 deg F Ambient, IP44 Enclosure, Thrust Bearing, 13.78 in W x 14.25 in H Dimensions
Grundfos large UPS is a canned rotor, centrifugal pump for circulating water in heating systems and smaller air conditioner systems in commercial buildings. These pumps are based on glandless pump or canned rotor technology. The pumped liquid cools and lubricates the motor and rotating parts. Large UPS circulators are typically used in commercial building like schools, hospitals and office buildings for circulating domestic hot water, heating water and air conditioning fluid. The name UPS stands for the German Umwelts Pumpen Selektra, directly translated as circulator pumps selective. S for Selektra indicates that you can select between three speed settings.
Attributes
Features
- Quiet operation
- Maintenance-free
- Easy to install
- Small profile (1-piece vs 3-piece)
- Seal less, which eliminates worries about hot water leakage
- Pumped water lubricates the shaft and bearings so there is no oil to leak
- No couplers to change
- Wet rotor design
- Terminal box or Line cord models
- UPS pumps have a 2 or 3 speed switch, which increases the comfort level for the application
- Cast iron housing
- GF 80 flange connection