LAARS JVS-100 100000 BTU NAT GAS SPARK IGN BOILER
Product Details
Attributes
Features
Resources
Bradford White® Brute™ Mini Hydronic Boiler, Natural Gas Fuel, 100000 Btu/hr Input, 1-1/4 in NPT Water/3/4 in NPT Gas Connection, Spark Pilot Ignition, 85 MBtu/hr DOE Heating, 85 % AFUE, 115 VAC, >12 A, 6 in Flue Outlet, Built-In Draft Diverter Vent, 27-1/2 in D x 28-3/4 in H
Brute™ Mini's simple design, compact size and unique 2-stage firing (standard on all 100-225 models) can improve comfort and heating efficiency in nearly any hydronic system. All Brute™ Mini models comply with DOE 2012 minimum efficiency requirements for residential boilers and are factory-equipped with user-friendly boiler reset control system.
- PI controller
- Outdoor reset with ratios of 0.4 to 3.6
- Indicator lights for power, heat call, DHW call and WWSD
- Automatic boiler differential
- Pump pre-purge, post-purge and exercise
- Codes for sensor errors
- Pressure relief valve: capacity in excess of boiler input rating
- Headers: Cast iron per ASME requirements
- Copper with integral formed external fins tubes
- Aluminized steel main burners
- Natural aspiration air supply
- 115 V, 60 Hz, 1 Ph less than 12 A, 24 V transformer mounted and wired
- Standard pump relay
- Vent damper and wire harness
- Flame rollout safety switch
- 0 to 2000 ft altitude
- Revision 2
- ON/OFF Firing System
- 1-phase
Product Details
Bradford White® Brute™ Mini Hydronic Boiler, Natural Gas Fuel, 100000 Btu/hr Input, 1-1/4 in NPT Water/3/4 in NPT Gas Connection, Spark Pilot Ignition, 85 MBtu/hr DOE Heating, 85 % AFUE, 115 VAC, >12 A, 6 in Flue Outlet, Built-In Draft Diverter Vent, 27-1/2 in D x 28-3/4 in H
Brute™ Mini's simple design, compact size and unique 2-stage firing (standard on all 100-225 models) can improve comfort and heating efficiency in nearly any hydronic system. All Brute™ Mini models comply with DOE 2012 minimum efficiency requirements for residential boilers and are factory-equipped with user-friendly boiler reset control system.
Attributes
Features
- PI controller
- Outdoor reset with ratios of 0.4 to 3.6
- Indicator lights for power, heat call, DHW call and WWSD
- Automatic boiler differential
- Pump pre-purge, post-purge and exercise
- Codes for sensor errors
- Pressure relief valve: capacity in excess of boiler input rating
- Headers: Cast iron per ASME requirements
- Copper with integral formed external fins tubes
- Aluminized steel main burners
- Natural aspiration air supply
- 115 V, 60 Hz, 1 Ph less than 12 A, 24 V transformer mounted and wired
- Standard pump relay
- Vent damper and wire harness
- Flame rollout safety switch
- 0 to 2000 ft altitude
- Revision 2
- ON/OFF Firing System
- 1-phase