Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
warningThis product has additional required/recommended products.
content loaded
BRADFORD RG2PDV50S6N-220 SEA-LEVEL/HIGH-ALTITUDE 50USG 36MBH NATURAL GAS PDV WATER HEATER
MFR Part #: RG2PDV50S6N-220
SKU #: 1256872
Brand: Bradford White®
UPC: 671632859948
Bradford White® Defender Safety System® RG2PDV50S6N Gas Water Heater, 40000 Btu/hr Heating, 50 gal Tank, Natural Gas Fuel, Direct/Power Vent, 43 gph Recovery, Domestic
6 Years Limited on Tank/6 Years Limited on Component Parts
Temperature and Pressure Relief Valve
Residential Application
AHRI Certified | ANSI Z21.10.1-2014 | ASHRAE 90.1b | CEC Listed | CSA 4.1-2014 | CSA International (Formerly AGA/CGA) | CSA LLC - Low Lead Compliant | EnergyStar® Certified | Massachusetts Approved | NAECA Compliant | NSF 372 | PROP65: Cancer and Reproductive Harm - www.P65warnings.ca.gov
Product Details
Attributes
Features
Resources
Bradford White® Defender Safety System® Gas Water Heater, 40000 Btu/hr Heating, Natural Gas Fuel, 1/2 in Gas Connection, 50 gal Tank, Pilot Ignition, Direct/Power Vent, 2 x 3 in Vent, 43 gph Recovery Rate, 0.68, 3/4 in NPT Water Connection, 150 psi Pressure, No Ultra Low NOx, 24 in Dia x 34-3/8 in D x 60-7/8 in H, Domestic
The -220 indicates that this SKU was designed to operate in Altitudes ranging from 0 to 4,500 feet, and are certified for Installation in Canada.
Bradford White Defender Safety System®, 50 Gallon Standard Residential Gas (Natural) Power Direct Vent Water Heater. 6-Year Tank Warranty, 40,000 BTU/Hr., 120 Volts, Single Phase, with Power Cord included.
Country Of Origin:
US
Dimensions:
24 in Dia x 34-3/8 in D x 60-7/8 in H
Domestic/Import:
Domestic
Energy Factor:
.68
Fuel Type:
Natural Gas
Gas Connection:
1/2 in
Heating Capacity:
40000 Btu/hr, 36000 btu
Ignition Type:
Pilot
Pressure Rating:
150 psi
Recovery Rate:
43 gph
Tank Capacity:
50 gal
Ultra Low NOx:
No
Vent Size:
2 x 3 in
Vent Type:
Direct/Power
Water Connection:
3/4 in NPT
Water Heater Type:
Gas
- EnergyStar® qualified: Some models meet or exceed requirements for EnergyStar® per the latest EnergyStar® criteria revision, as well as most utility rebate programs
- Bradford White® ICON System™: Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC)
- Enhanced performance: Proprietary algorithms provide enhanced first hour delivery rating and tighter temperature differentials
- Advanced temperature control system: Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
- Intelligent diagnostics: An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting
- Pilot on indication: Flashing green led provides positive indication that pilot is on
- Separate immersed thermowell: High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
- Closed combustion venting system: Power direct vent models are ideal for installations which lack sufficient are for combustion, such as new construction homes or additions which are tightly insulated, these models use a twin pipe system where combustion air is drawn from outside the building in one pipe, and combustion products are expelled to the outside in another pipe
- Cast aluminum air intake boot: A cast molded air intake boot design provides exceptional durability during installation and operation
- Horizontal and vertical venting: PVC, ABS, or CPVC, the equivalent feet of intake venting cannot be greater than the equivalent feet of exhaust venting
- Flammable vapor sensor: Electronic sensor prevents burner operation if flammable vapors are detected
- Factory installed Hydrojet® total performance system: Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank
- Vitraglas® lining
- Insulation system: 2 in non-CFC foam insulation covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies, and jacket rigidity
- Water connections: 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections
- Side connections: 3/4 in NPT tapping's allow easy connections for space heating applications
- Factory installed heat traps: Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation
- Protective magnesium anode rod: Provide added protection against corrosion for long-term, trouble free service
- Low restriction brass drain valve: Durable tamper proof design
- NOx emission: less than 40 ng/J
Product Details
Bradford White® Defender Safety System® Gas Water Heater, 40000 Btu/hr Heating, Natural Gas Fuel, 1/2 in Gas Connection, 50 gal Tank, Pilot Ignition, Direct/Power Vent, 2 x 3 in Vent, 43 gph Recovery Rate, 0.68, 3/4 in NPT Water Connection, 150 psi Pressure, No Ultra Low NOx, 24 in Dia x 34-3/8 in D x 60-7/8 in H, Domestic
The -220 indicates that this SKU was designed to operate in Altitudes ranging from 0 to 4,500 feet, and are certified for Installation in Canada.
Bradford White Defender Safety System®, 50 Gallon Standard Residential Gas (Natural) Power Direct Vent Water Heater. 6-Year Tank Warranty, 40,000 BTU/Hr., 120 Volts, Single Phase, with Power Cord included.
Attributes
Country Of Origin: US
Dimensions: 24 in Dia x 34-3/8 in D x 60-7/8 in H
Domestic/Import: Domestic
Energy Factor: .68
Fuel Type: Natural Gas
Gas Connection: 1/2 in
Heating Capacity: 40000 Btu/hr, 36000 btu
Ignition Type: Pilot
Pressure Rating: 150 psi
Recovery Rate: 43 gph
Tank Capacity: 50 gal
Ultra Low NOx: No
Vent Size: 2 x 3 in
Vent Type: Direct/Power
Water Connection: 3/4 in NPT
Water Heater Type: Gas
Features
- EnergyStar® qualified: Some models meet or exceed requirements for EnergyStar® per the latest EnergyStar® criteria revision, as well as most utility rebate programs
- Bradford White® ICON System™: Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC)
- Enhanced performance: Proprietary algorithms provide enhanced first hour delivery rating and tighter temperature differentials
- Advanced temperature control system: Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
- Intelligent diagnostics: An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting
- Pilot on indication: Flashing green led provides positive indication that pilot is on
- Separate immersed thermowell: High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
- Closed combustion venting system: Power direct vent models are ideal for installations which lack sufficient are for combustion, such as new construction homes or additions which are tightly insulated, these models use a twin pipe system where combustion air is drawn from outside the building in one pipe, and combustion products are expelled to the outside in another pipe
- Cast aluminum air intake boot: A cast molded air intake boot design provides exceptional durability during installation and operation
- Horizontal and vertical venting: PVC, ABS, or CPVC, the equivalent feet of intake venting cannot be greater than the equivalent feet of exhaust venting
- Flammable vapor sensor: Electronic sensor prevents burner operation if flammable vapors are detected
- Factory installed Hydrojet® total performance system: Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank
- Vitraglas® lining
- Insulation system: 2 in non-CFC foam insulation covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies, and jacket rigidity
- Water connections: 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections
- Side connections: 3/4 in NPT tapping's allow easy connections for space heating applications
- Factory installed heat traps: Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation
- Protective magnesium anode rod: Provide added protection against corrosion for long-term, trouble free service
- Low restriction brass drain valve: Durable tamper proof design
- NOx emission: less than 40 ng/J