WATTS 0121273 LF05-CXT 3/8 COMPRESSION TEE WATER HAMMER ARRESTOR
Product Details
Attributes
Features
Resources
WATTS® Water Mini-Hammer Arrester, Series: LF05, 3/8 in Nominal, OD Compression x Reverse Compression Nut, 150 psi, 33 to 180 deg F, 2-5/16 in W x 4-3/8 in H, Import
This lead free 3/8 in mini water hammer Arrester provides economical and effective single fixture protection used in residential water system applications such as dishwasher, washing machine and fast closing positive shutoff valve applications. It is designed to provide automatic, repetitive control of water hammer in residential and light industrial applications and prevent water hammer conditions that are damaging to pipes and appliances. This is a factory air charged, permanently sealed unit with OD compression end fittings and a tee shaped body design. It should be installed as close to the shock source as possible with one unit each for the hot and cold water lines. The temperature range is 33 to 180 deg F and the operating pressure is up to 150 psi.
- Ideal for dishwashers, washing machines and quick-closing faucets
- Can be installed vertically, horizontally or any angle in concealed locations without access panels
- Factory air charged and are not rechargeable
- 60 psi air pre-load
- The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight
Product Details
WATTS® Water Mini-Hammer Arrester, Series: LF05, 3/8 in Nominal, OD Compression x Reverse Compression Nut, 150 psi, 33 to 180 deg F, 2-5/16 in W x 4-3/8 in H, Import
This lead free 3/8 in mini water hammer Arrester provides economical and effective single fixture protection used in residential water system applications such as dishwasher, washing machine and fast closing positive shutoff valve applications. It is designed to provide automatic, repetitive control of water hammer in residential and light industrial applications and prevent water hammer conditions that are damaging to pipes and appliances. This is a factory air charged, permanently sealed unit with OD compression end fittings and a tee shaped body design. It should be installed as close to the shock source as possible with one unit each for the hot and cold water lines. The temperature range is 33 to 180 deg F and the operating pressure is up to 150 psi.
Attributes
Features
- Ideal for dishwashers, washing machines and quick-closing faucets
- Can be installed vertically, horizontally or any angle in concealed locations without access panels
- Factory air charged and are not rechargeable
- 60 psi air pre-load
- The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight