content loaded
WATTS 0121239 Image 1

WATTS 0121239 LFTP300S 1/2 TRAP PRIMER

MFR Part #: 0121239
SKU #: 1120469
Brand: WATTS®
UPC: 098268580440
WATTS® 0121239 LFTP300 Trap Primer, 1/2 in Pipe, 4-1/4 in L, Solder Connection, Brass, Import
Commercial and Residential
ASSE 1018 | CSA Certified | IAPMO Listed | SA B125.3 UPC Listed | PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm.

WATTS® Trap Primer, Series: LFTP300, 1/2 in Pipe, 4-1/4 in Length, Solder, Brass, 1-1/4 in W, Import

This 1/2 inch trap primer is installed in plumbing systems to prevent floor drain traps from losing their water seal by evaporation. It operates by sensing the pressure drop in the supply line from downstream fixtures or appliances. This trap primer features a lead free brass body with EDPM seals, built-in air gap, and 1/2 inch solder inlet and 1/2 inch female NPT outlet. The minimum supply pressure must exceed 25 psi (172 kPa) and the maximum supply pressure is 125 psi (8.6 bar).

Product Details

WATTS® Trap Primer, Series: LFTP300, 1/2 in Pipe, 4-1/4 in Length, Solder, Brass, 1-1/4 in W, Import

This 1/2 inch trap primer is installed in plumbing systems to prevent floor drain traps from losing their water seal by evaporation. It operates by sensing the pressure drop in the supply line from downstream fixtures or appliances. This trap primer features a lead free brass body with EDPM seals, built-in air gap, and 1/2 inch solder inlet and 1/2 inch female NPT outlet. The minimum supply pressure must exceed 25 psi (172 kPa) and the maximum supply pressure is 125 psi (8.6 bar).

Attributes

ConnectionSolder
Country Of OriginChina
Dimensions1-1/4 in W
Domestic/ImportImport
Length4-1/4 in
MaterialBrass
Pipe Size1/2 in
SeriesLFTP300

Features

  • Prevents backflow of sewer gas into building
  • Built in vacuum breaker ports 6
  • The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight
  • EPDM seals
  • Must be installed on a cold water line serving a frequently used fixture
  • For proper trap priming, minimum flows must exceed those stated in the flow chart
  • Lead free brass construction