WATTS 0204144 LFUSG-B-SC-M2 3/8 COMPRESSION 80-120F THERM MIXING VALVE
Product Details
Attributes
Features
Resources
WATTS® Under Sink Guardian® Thermostatic Mixing Valve, Series: USG, 3/8 in Nominal, Compression, 150 psi, 80 to 120 deg F, 0.25 gpm Flow, Media: Hot/Cold Water, Brass Body, Buna-N® Rubber Disc, O-Ring, Satin Chrome Plated, Domestic
Series LFUSG-B Under Sink Guardian Thermostatic Mixing Valves are used in commercial and residential applications to mix hot and cold water in under-the-sink installations to minimize the risk of accidental scalding. It consists of a Lead Free brass body construction with 3/8 in. male compression connections and quick-connect, check valves, tamper resistant locking nut and integral strainer with 40 mesh stainless steel screens to filter out debris. Series LFUSG-B uses a thermostat to control hot and cold water temperature, and dual check valves to protect against cross flow. It provides superior flow rate (between 0.25 and 2.25 gpm), accurate temperature control, and low pressure drop. It is suitable for under the counter installations where the water delivered to the fixtures is intended for washing. Satin-chrome finish (-SC) models available. ASSE 1070, CUPC listed.
- Accurate temperature control with low pressure drop
- Provides superior flow rate between 0.25 and 2.5 GPM
- Lead free brass body construction
- Installs easily between the stop valves and faucet
- Built-in check valves prevent migration of hot water to cold and cold water to hot water piping
- Provided with cap for three port application
- Integral strainer with 40 mesh stainless steel screens to filter out debris
- 30 psi minimum supply pressure
- 5 deg F minimum inlet temperature differential
- The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight
Product Details
WATTS® Under Sink Guardian® Thermostatic Mixing Valve, Series: USG, 3/8 in Nominal, Compression, 150 psi, 80 to 120 deg F, 0.25 gpm Flow, Media: Hot/Cold Water, Brass Body, Buna-N® Rubber Disc, O-Ring, Satin Chrome Plated, Domestic
Series LFUSG-B Under Sink Guardian Thermostatic Mixing Valves are used in commercial and residential applications to mix hot and cold water in under-the-sink installations to minimize the risk of accidental scalding. It consists of a Lead Free brass body construction with 3/8 in. male compression connections and quick-connect, check valves, tamper resistant locking nut and integral strainer with 40 mesh stainless steel screens to filter out debris. Series LFUSG-B uses a thermostat to control hot and cold water temperature, and dual check valves to protect against cross flow. It provides superior flow rate (between 0.25 and 2.25 gpm), accurate temperature control, and low pressure drop. It is suitable for under the counter installations where the water delivered to the fixtures is intended for washing. Satin-chrome finish (-SC) models available. ASSE 1070, CUPC listed.
Attributes
Features
- Accurate temperature control with low pressure drop
- Provides superior flow rate between 0.25 and 2.5 GPM
- Lead free brass body construction
- Installs easily between the stop valves and faucet
- Built-in check valves prevent migration of hot water to cold and cold water to hot water piping
- Provided with cap for three port application
- Integral strainer with 40 mesh stainless steel screens to filter out debris
- 30 psi minimum supply pressure
- 5 deg F minimum inlet temperature differential
- The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight