WATTS 0354555 P-60M1 1/4 PRESSURE REGULATOR 0-60PSI
Product Details
Attributes
Features
Resources
WATTS® Pressure Regulator, Miniature, Series: P60-M1, 1/4 in Nominal, FNPT, 300 psi, 33 to 150 deg F, Media: Water, 1-9/16 in Inlet to Outlet Length, 2-3/16 in Top to Inlet Center, Thermoplastic Body, 300 Stainless Steel/Poly-Ether-Sulfone Trim, Domestic
This 1/4 inch miniature water pressure regulator is compact and lightweight with a high flow capacity. It is used in general purpose and OEM applications where a small economical package is required. It is also suitable for deionized water applications. It has a balanced piston design for applications to regulate pressure in systems that require a constant downstream and accurate flow performance. It consists of a thermoplastic body construction, NPT female connections in a straight through gauge port, a rubber disc, diaphragm, and seals of FDA grade elastomers, stainless steel internal metal components. The reduced pressure range is 0 to 60 psi (0 to 4.22 bar) and the temperature range is 33 to 150 degrees F (0.5 to 66 degrees C).
- Compact design and lightweight construction
- All external components are made of NSF approved thermoplastics
- All internal rubber components such as disc, diaphragm and seals are all FDA grade elastomers
- All internal metal components inch contact with fluid are of 300 series stainless steel
- High capacity
- Bottom clean out plug for service
- The wetted surface of this product contacted by consumable water contains less than 0.25 Percent of lead by weight
- Temperature range is 33 F to 150 deg F (0.5 C to 66 deg C)
Product Details
WATTS® Pressure Regulator, Miniature, Series: P60-M1, 1/4 in Nominal, FNPT, 300 psi, 33 to 150 deg F, Media: Water, 1-9/16 in Inlet to Outlet Length, 2-3/16 in Top to Inlet Center, Thermoplastic Body, 300 Stainless Steel/Poly-Ether-Sulfone Trim, Domestic
This 1/4 inch miniature water pressure regulator is compact and lightweight with a high flow capacity. It is used in general purpose and OEM applications where a small economical package is required. It is also suitable for deionized water applications. It has a balanced piston design for applications to regulate pressure in systems that require a constant downstream and accurate flow performance. It consists of a thermoplastic body construction, NPT female connections in a straight through gauge port, a rubber disc, diaphragm, and seals of FDA grade elastomers, stainless steel internal metal components. The reduced pressure range is 0 to 60 psi (0 to 4.22 bar) and the temperature range is 33 to 150 degrees F (0.5 to 66 degrees C).
Attributes
Features
- Compact design and lightweight construction
- All external components are made of NSF approved thermoplastics
- All internal rubber components such as disc, diaphragm and seals are all FDA grade elastomers
- All internal metal components inch contact with fluid are of 300 series stainless steel
- High capacity
- Bottom clean out plug for service
- The wetted surface of this product contacted by consumable water contains less than 0.25 Percent of lead by weight
- Temperature range is 33 F to 150 deg F (0.5 C to 66 deg C)