Branch: 
Airdrie
Contact Us
About Us
Locationsmore info
Events
Careers
Showrooms
Showrooms
home
home
Brands
Services
Quick Order
Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
content loaded
LIBERTY FLH61A-2 Image 1

LIBERTY FLH61A-2 SUBMERSIBLE EFFLUENT PUMP 6/10HP 115V AUTO

MFR Part #: FLH61A-2
SKU #: 1225610
Brand: Liberty Pumps®
UPC: 671812142334
Liberty Pumps® FLH61A-2 FLH60, 74 gpm Max Flow, 15 ft Rated Head, Automatic, 115 VAC, 1 Phase
3 Years Limited
1-ph Motor
Step Systems, Mound Systems, Liquid Waste Transfer and Higher Head Dewatering Applications
cCSAus Certified | SSPMA Certified | PROP65: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Liberty Pumps®, FLH61A-2, High-Head, Series: FLH60, 74 gpm Maximum, 15 ft Rated Head, Automatic/Non Automatic: Automatic, 1-1/2 in, 2 in FNPT Outlet, 6/10 hp, 115 VAC, 12 A Full Load/38.9 A Locked Rotor, 60 Hz Frequency, 1 ph, 3450 rpm Motor, SJOOW 25 ft Cord, Cast Iron Multi-Vane Semi-Open Impeller, 104 deg F Continuous/140 deg F Intermittent, NEMA 1/4X Enclosure, Ball/Race Bearing, 11.2 in W x 7 in D x 16.4 in H Dimensions

The FL60 series by Liberty is a mid-range effluent pump designed for STEP systems, mound systems, liquid waste transfer and higher head de-watering applications. Built of heavy cast iron with an epoxy powder coat finish and stainless steel fasteners, the FL60 will provide years of reliable performance.

Product Details

Liberty Pumps®, FLH61A-2, High-Head, Series: FLH60, 74 gpm Maximum, 15 ft Rated Head, Automatic/Non Automatic: Automatic, 1-1/2 in, 2 in FNPT Outlet, 6/10 hp, 115 VAC, 12 A Full Load/38.9 A Locked Rotor, 60 Hz Frequency, 1 ph, 3450 rpm Motor, SJOOW 25 ft Cord, Cast Iron Multi-Vane Semi-Open Impeller, 104 deg F Continuous/140 deg F Intermittent, NEMA 1/4X Enclosure, Ball/Race Bearing, 11.2 in W x 7 in D x 16.4 in H Dimensions

The FL60 series by Liberty is a mid-range effluent pump designed for STEP systems, mound systems, liquid waste transfer and higher head de-watering applications. Built of heavy cast iron with an epoxy powder coat finish and stainless steel fasteners, the FL60 will provide years of reliable performance.

Attributes

Country Of Origin: US
Horsepower: 6/10 hp
Maximum Flow Rate: 74 gpm
Outlet Size: 1-1/2 in, 2 in FNPT
Amperage Rating: 12 A Full Load/38.9 A Locked Rotor
Automatic/Non Automatic: Automatic
Bearing Type: Ball/Race
Cord Type: SJOOW 25 ft
Dimensions: 11.2 in W x 7 in D x 16.4 in H
Enclosure Type: NEMA 1/4X
Frequency Rating: 60 Hz
Impeller Type: Cast Iron Multi-Vane Semi-Open
Material: Cast Iron
Motor Speed: 3450 rpm
Phase: 1
Rated Head: 15 ft
Series: FLH60
Temperature Rating: 104 deg F Continuous/140 deg F Intermittent
Type: High-Head
Voltage Rating: 115 VAC

Features

  • Semi-open impeller permits passage of solids without clogging
  • Heavy cast iron construction
  • 416 stainless steel rotor shaft
  • Permanently lubricated upper and lower ball bearings
  • Unitized carbon and ceramic shaft seal
  • 25 ft quick connect power cord
  • 3/4 in solid handling
  • The exterior of the casting shall be protected with powder coat paint

Resources

Instruction/Installation Manual
Specification Sheet