content loaded
LIBERTY LEH155M2-2 Image 1

LIBERTY LEH155M2-2 SUBMERSIBLE SEWAGE PUMP 1-1/2HP 25FT CORD 575V

MFR Part #: LEH155M2-2
SKU #: 1154581
Brand: Liberty Pumps®
UPC: 671812131840
Liberty Pumps® LEH155M2-2 LEH50, 1-1/2 hp, 575 VAC, 2 in Flanged Outlet, Cast Iron, 4.8 A Full Load/24 A Locked Rotor, 3 Phase
3 Years
cCSAus Certified | SSPMA Certified | PROP65: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Liberty Pumps®, LEH155M2-2, High-Head Manual, Series: LEH50, 200 gpm Flow Rate, 2 in Flanged Outlet, 70 ft Maximum Head, 1-1/2 hp, 575 VAC, 4.8 A Full Load/24 A Locked Rotor, 60 Hz Frequency, 3 ph, 3450 rpm Motor, SEOOW 25 ft Cord, 1 Service Factor, Cast Iron 2-Vane Semi-Open Impeller, Ball Bearing, Cast Iron, 13 in W x 21 in H Dimensions

The LEH150 by Liberty is a high-head 2 in solids-handling Sewage Pump. The LEH150 features Liberty's unique one-piece cast iron body and quick-disconnect cords in 25 ft standard length. Available in 2 or 3 in flanged discharge and a variety of voltages, the LEH150 has a maximum head of 70 ft and is backed by Liberty's 3 years warranty.

Product Details

Liberty Pumps®, LEH155M2-2, High-Head Manual, Series: LEH50, 200 gpm Flow Rate, 2 in Flanged Outlet, 70 ft Maximum Head, 1-1/2 hp, 575 VAC, 4.8 A Full Load/24 A Locked Rotor, 60 Hz Frequency, 3 ph, 3450 rpm Motor, SEOOW 25 ft Cord, 1 Service Factor, Cast Iron 2-Vane Semi-Open Impeller, Ball Bearing, Cast Iron, 13 in W x 21 in H Dimensions

The LEH150 by Liberty is a high-head 2 in solids-handling Sewage Pump. The LEH150 features Liberty's unique one-piece cast iron body and quick-disconnect cords in 25 ft standard length. Available in 2 or 3 in flanged discharge and a variety of voltages, the LEH150 has a maximum head of 70 ft and is backed by Liberty's 3 years warranty.

Attributes

Country Of OriginUS
Horsepower1-1/2 hp
Maximum Head70 ft
Outlet Size2 in Flanged
TypeHigh-Head Manual
Voltage Rating575 VAC
Amperage Rating4.8 A Full Load/24 A Locked Rotor
Bearing TypeBall
Cord TypeSEOOW 25 ft
Dimensions13 in W x 21 in H
Flow Rate200 gpm
Frequency Rating60 Hz
Impeller TypeCast Iron 2-Vane Semi-Open
MaterialCast Iron
Motor Speed3450 rpm
Phase3
SeriesLEH50
Service Factor1

Features

  • Cast iron housing and volute
  • Oil filled, hermetically sealed motor
  • 303 stainless steel rotor shaft
  • Single float mechanical level control with series plug for manual bypass operation standard on 1-phase automatic models
  • Permanently lubricated upper and lower ball bearings
  • Dual, unitized shaft seals
  • Quick connect 25 ft power cord
  • Built-in thermal protection on 1-phase models
  • Adjustable pumping range
  • Stainless and brass fasteners