STANPRO SLC12160-2N09T BATTERY PACK 150W W/2 HEADS
Product Details
Attributes
Features
Resources
Stanpro Battery Unit, 2-Lamp, Series: SLC, 120/347 VAC, 12 VDC, 160 W Fixture, 60 Hz Frequency, PAR18 LED Lamp, 3 to 7 W Lamp, 2 Heads, Lead Acid Battery Power Source, Surface Mounting, 15.875 in H x 14.25 in W x 4.262 in D Dimensions, Steel, White
The SLC series of commercial steel battery units is designed to provide efficient and reliable emergency lighting. Utilizing a sturdy, all steel housing, the SLC presents a modern and unobtrusive design. On higher capacity models, the cabinet front is sloped to allow better internal access and superior low angle light distribution. The SLC series is available in 6/12/24 VDC versions in a range of wattage capacities up to 360 W, for 30 min duration. Units are typically supplied with two top mounted PAR18 or PAR36 type heads, however a wide range of head type, number and placement are available including MR16 type. The SLC can also accommodate a wide variety of options, including auto-testing self-diagnostics and remote testing.
- 120/347 VAC 60Hz input, field selectable
- High efficiency, rapid recovery, precision control charging system
- 6 VDC, 12 VDC or 24 VDC emergency power output versions (as specified)
- Wattage capacities up to 360 W
- 30 minutes emergency power duration standard
- Momentary push button test switch
- Diagnostic/pilot LEDs for AC on and charge
- Fully automatic, current limited charger
- Line latched, low voltage protection
- Solid state design and construction
- Brownout and short-circuit protection
- Temperature compensated
- Complete battery recharge in 24 hr
- Maintenance free, sealed lead-acid battery
- Optional automatic-testing, self-diagnostic charger board
- Continuously monitors the operational status of the battery unit
- Automatically performs battery and lamp load testing at preset intervals
- Indicates any component malfunctions or automated test failures
- 120 VAC line cord supplied standard
- Universal spider knockout pattern and keyhole mounting slots stamped into back of cabinet
Product Details
Stanpro Battery Unit, 2-Lamp, Series: SLC, 120/347 VAC, 12 VDC, 160 W Fixture, 60 Hz Frequency, PAR18 LED Lamp, 3 to 7 W Lamp, 2 Heads, Lead Acid Battery Power Source, Surface Mounting, 15.875 in H x 14.25 in W x 4.262 in D Dimensions, Steel, White
The SLC series of commercial steel battery units is designed to provide efficient and reliable emergency lighting. Utilizing a sturdy, all steel housing, the SLC presents a modern and unobtrusive design. On higher capacity models, the cabinet front is sloped to allow better internal access and superior low angle light distribution. The SLC series is available in 6/12/24 VDC versions in a range of wattage capacities up to 360 W, for 30 min duration. Units are typically supplied with two top mounted PAR18 or PAR36 type heads, however a wide range of head type, number and placement are available including MR16 type. The SLC can also accommodate a wide variety of options, including auto-testing self-diagnostics and remote testing.
Attributes
Features
- 120/347 VAC 60Hz input, field selectable
- High efficiency, rapid recovery, precision control charging system
- 6 VDC, 12 VDC or 24 VDC emergency power output versions (as specified)
- Wattage capacities up to 360 W
- 30 minutes emergency power duration standard
- Momentary push button test switch
- Diagnostic/pilot LEDs for AC on and charge
- Fully automatic, current limited charger
- Line latched, low voltage protection
- Solid state design and construction
- Brownout and short-circuit protection
- Temperature compensated
- Complete battery recharge in 24 hr
- Maintenance free, sealed lead-acid battery
- Optional automatic-testing, self-diagnostic charger board
- Continuously monitors the operational status of the battery unit
- Automatically performs battery and lamp load testing at preset intervals
- Indicates any component malfunctions or automated test failures
- 120 VAC line cord supplied standard
- Universal spider knockout pattern and keyhole mounting slots stamped into back of cabinet