FIAT SF1F100 20X23-7/8 LAUNDRY TUB WITH LEGS WHITE

FIAT® Tub-Tub™ Laundry Tub, Series: SF1F, 19-1/4 in L x 19-1/2 in W x 13 in H Bowl, 2 Faucet Holes, 4 in Faucet Hole Spacing, 1 Basin, 20 in L x 23-1/8 in W x 33-11/16 in H, 4 Legs, Steel Leg Material, Floor Mount, Polyethylene, White

The single compartment Tub-Tub™ Laundry Tubs from FIAT® products, is manufactured from a molded, fine celled, structural plastic polymer. The basic model number is SF-1 and has an integrally molded drain. Plastic stopper and tail piece nut with washer are supplied with all models. Water capacity is 20 gal. Outside, front to back dimensions are equal to laundry room appliances (washer and dryer). Overall outside dimensions measured at the top of the tub, are 20 x 23-7/8 x 14-3/8 in and inside, compartment dimensions, measured at the drain opening, are 19-1/4 x 19-1/2 x 13 in. A 4 in ledge, integrally molded at back of the unit, includes two soap dish locations and two 1 in diameter molded holes. Holes are used to accept an optional, 4 in on centers deck faucet. The floor mounted Tub-Tub™ model SF-1-F shall be supported by factory furnished, white baked enamel steel angle legs that fit into the molded retainers located in each of four corners of the underside of the Laundry Tub. The fully assembled model shall withstand loads of up to 250 lb. Legs are supplied with leveling devices. Recommended height of installed unit, from floor is 33-3/4 in.