content loaded
WEBSTONE 50403 Image 1

WEBSTONE H-50403 3/4 SWT X FLANGE FULL PORT BRASS BALL VALVE

MFR Part #: 50403
SKU #: 1032783
Brand: NIBCO® | Webstone
UPC: 018394504035
Webstone The Isolator® 50403 5040 Standard Uni-Flange Ball Valve, 3/4 in Nominal, C x Flange End Style, Forged Brass Body, Full Port, PTFE Softgoods, Import
Lifetime
Residential, Commercial and Industrial Applications
ASME B16.18 | ASME B16.18 Annex A | PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Webstone The Isolator®, 50403, Ball Valve, Standard Uni-Flange, Series: 5040, 3/4 in Nominal, C x Flange End Style, 600 psi CWP Pressure, 100 deg F, Full Port, Media: Glycol Mixture/Oil/Water, 3/4 in Orifice, Lever Handle Actuator, 2-9/16 in Inlet to Outlet Length, 2-1/16 in Top to Inlet Center, Forged Brass Body, PTFE Softgoods, Import

Designed for residential, commercial or industrial use with water or a glycol mixture. This approved Webstone valve is actuated by a blow-out proof stem and features an adjustable packing gland. Flange features a conical inlet to minimize turbulence. Solder joint temperature ratings are per ASME B16.18 Annex A for 95-5 solder. Other solder materials have lower pressure/temperature limits. Do not silver braze or overheat valves when soldering.

Product Details

Webstone The Isolator®, 50403, Ball Valve, Standard Uni-Flange, Series: 5040, 3/4 in Nominal, C x Flange End Style, 600 psi CWP Pressure, 100 deg F, Full Port, Media: Glycol Mixture/Oil/Water, 3/4 in Orifice, Lever Handle Actuator, 2-9/16 in Inlet to Outlet Length, 2-1/16 in Top to Inlet Center, Forged Brass Body, PTFE Softgoods, Import

Designed for residential, commercial or industrial use with water or a glycol mixture. This approved Webstone valve is actuated by a blow-out proof stem and features an adjustable packing gland. Flange features a conical inlet to minimize turbulence. Solder joint temperature ratings are per ASME B16.18 Annex A for 95-5 solder. Other solder materials have lower pressure/temperature limits. Do not silver braze or overheat valves when soldering.

Attributes

Ball MaterialBrass
Body MaterialForged Brass
Connection TypeC x Flange
Country Of OriginChina
Domestic/ImportImport
Inlet to Outlet Length2-9/16 in
MediaGlycol Mixture/Oil/Water
Nominal Size3/4 in
Operator TypeLever Handle
Orifice Size3/4 in
Port TypeFull
Pressure Rating600 psi CWP
Series5040
Softgoods MaterialPTFE
Temperature Rating100 deg F
Top to Inlet Center2-1/16 in
Trim MaterialBrass/PTFE
TypeStandard Uni-Flange

Features

  • Unique uni-body design is preserved
  • Heavy duty forged brass construction
  • Ball valve with integral spring check saves labor, space, and leak paths
  • Guaranteed for life
  • Replace three component
  • Saves 18 min
  • Fits virtually any standard circulator pump
  • Flange feature a conical inlet to minimize turbulence
  • These valves have revolutionized the installation of circulator pumps
  • Easily isolate the pump for replacement
  • Prevent electrolysis and eliminate galvanic corrosion
  • Eliminate two leak path
  • Our original Isolator® uni-flange ball valve design has evolved into the largest flanged ball valve program in the industry today
  • Full port forged brass ball valve with adjustable packing gland, nuts and bolts
  • PTFE seat/stem seal
  • This valve is actuated by a blowout proof stem