AXIOM SF100-D-P DUPLEX UNIT WITH ALTERNATING CONTROL PANEL
Product Details
Attributes
Features
Resources
AXIOM Packed Hydronic System Feeder With Alternating Control Panel, 115 VAC, 60 Hz, 1 ph Phase, 5 to 55 psi, 1.4 gpm Flow Rate, 208 L Capacity, 49 in H x 24 in W
The SF100-D-P contains everything required to feed and pressurize closed hydronic heating or cooling systems in a neat, simple package that is easy-to-install and operate. It is compatible with both water and water/glycol solutions.
- 208 L tank for storage and mixing
- 2-pumps for seamless and reliable operation
- Plugs into any standard 115 VAC outlet
- Fluid level switch shuts the pump-off if the storage tank level gets low
- Accumulator tank prevents excessive pump cycling
- No direct connection to potable water supply eliminates need for backflow prevention
- Make-up fluid stored in the feeder tank can be pre-treated to meet appliance manufacturers specifications
- Prevents major floods - in the event of system rupture, only the contents of the tank will be pumped into the system
- Dropping fluid level provides immediate notice that the system has developed a leak
- Diverter valve for purging of air on initial start-up and manual agitation of solution
- Fluid drained for service can easily be put back into the system
- Flexible connection hose with system check valve makes installation easy
Product Details
AXIOM Packed Hydronic System Feeder With Alternating Control Panel, 115 VAC, 60 Hz, 1 ph Phase, 5 to 55 psi, 1.4 gpm Flow Rate, 208 L Capacity, 49 in H x 24 in W
The SF100-D-P contains everything required to feed and pressurize closed hydronic heating or cooling systems in a neat, simple package that is easy-to-install and operate. It is compatible with both water and water/glycol solutions.
Attributes
Features
- 208 L tank for storage and mixing
- 2-pumps for seamless and reliable operation
- Plugs into any standard 115 VAC outlet
- Fluid level switch shuts the pump-off if the storage tank level gets low
- Accumulator tank prevents excessive pump cycling
- No direct connection to potable water supply eliminates need for backflow prevention
- Make-up fluid stored in the feeder tank can be pre-treated to meet appliance manufacturers specifications
- Prevents major floods - in the event of system rupture, only the contents of the tank will be pumped into the system
- Dropping fluid level provides immediate notice that the system has developed a leak
- Diverter valve for purging of air on initial start-up and manual agitation of solution
- Fluid drained for service can easily be put back into the system
- Flexible connection hose with system check valve makes installation easy