ABB TH4364C 200A 3P 600V FUSIBLE DISCONNECT
Product Details
Attributes
Features
Resources
GE Spec-Setter™ Safety Switch, Type TH Fused Heavy Duty, 600 VAC, 200 A, 30 hp, 1 ph, 50/60 Hz Frequency, 3 Pole, 4 Wires, 200 kA Short Circuit, Handle Actuator, Class H/J/K/R Insulation, NEMA 1 Enclosure, 3-Point/Self-Leveling Mounting, Line/Load Lug Terminal, 60 to 75 deg C, 14.1 in W x 10.5 in D x 31.5 in H Dimensions, Stainless Steel, Hot Dipped Galvanized/Powder Coated
GE heavy duty safety switches are designed for commercial and industrial applications where safety, high performance and continuity of service are essential. Heavy duty switches are available in 30 to 1200 A, 600 VAC, 600 VDC maximum, fusible and non-fusible units and in NEMA type 1 (indoor), type 3R (outdoor), type 4/4X (water and dust-tight, corrosion-resistant) and type 5/12 (drip and dust-tight) enclosures. When used with class R or J fuses, 30 to 600 A switches have a UL listed short circuit rating of 200000 A RMS symmetrical. Switches rated 800 to 1200 A use class L fuses and have a UL listed short circuit rating of 100000 A RMS symmetrical. GE heavy duty safety switches are UL listed as service entrance equipment when installed in accordance with the national electrical code.
- Highly visible On/Off label takes the guesswork out of safety and gives a clean, modern appearance
- Coin-proof, defeatable dual interlocks meet all safety inspection requirements
- Wide, unobstructed gutter and removable interior make wire pulling and lug connections quick and easy
- Three-point mounting pattern speeds installation and simplifies ganging in close quarters
- Clear line shield allows visual verification of blade position while guarding against accidental contact with live parts
- Plated blades provide visible confirmation of contact position
- Direct-drive, quick-make, quick-break mechanism "snaps" the contacts open and closed, providing positive On/Off indication while prolonging switch life
- Spring-reinforced fuse clips assure reliable contact for cool operation
- Suitable for class H, K, J or R fuses
- 25 hp at 480 VAC standard fuse, 50 hp at 480 VAC standard fuse, 50 hp at 480 VAC time delay, 125 hp at 480 VAC time delay, 3 hp at 600 VAC standard fuse, 60 hp at 600 VAC standard fuse, 50 hp at 600 VAC time delay, 150 hp at 600 VAC time delay, 14 at 250 VDC horsepower rating
Product Details
GE Spec-Setter™ Safety Switch, Type TH Fused Heavy Duty, 600 VAC, 200 A, 30 hp, 1 ph, 50/60 Hz Frequency, 3 Pole, 4 Wires, 200 kA Short Circuit, Handle Actuator, Class H/J/K/R Insulation, NEMA 1 Enclosure, 3-Point/Self-Leveling Mounting, Line/Load Lug Terminal, 60 to 75 deg C, 14.1 in W x 10.5 in D x 31.5 in H Dimensions, Stainless Steel, Hot Dipped Galvanized/Powder Coated
GE heavy duty safety switches are designed for commercial and industrial applications where safety, high performance and continuity of service are essential. Heavy duty switches are available in 30 to 1200 A, 600 VAC, 600 VDC maximum, fusible and non-fusible units and in NEMA type 1 (indoor), type 3R (outdoor), type 4/4X (water and dust-tight, corrosion-resistant) and type 5/12 (drip and dust-tight) enclosures. When used with class R or J fuses, 30 to 600 A switches have a UL listed short circuit rating of 200000 A RMS symmetrical. Switches rated 800 to 1200 A use class L fuses and have a UL listed short circuit rating of 100000 A RMS symmetrical. GE heavy duty safety switches are UL listed as service entrance equipment when installed in accordance with the national electrical code.
Attributes
Features
- Highly visible On/Off label takes the guesswork out of safety and gives a clean, modern appearance
- Coin-proof, defeatable dual interlocks meet all safety inspection requirements
- Wide, unobstructed gutter and removable interior make wire pulling and lug connections quick and easy
- Three-point mounting pattern speeds installation and simplifies ganging in close quarters
- Clear line shield allows visual verification of blade position while guarding against accidental contact with live parts
- Plated blades provide visible confirmation of contact position
- Direct-drive, quick-make, quick-break mechanism "snaps" the contacts open and closed, providing positive On/Off indication while prolonging switch life
- Spring-reinforced fuse clips assure reliable contact for cool operation
- Suitable for class H, K, J or R fuses
- 25 hp at 480 VAC standard fuse, 50 hp at 480 VAC standard fuse, 50 hp at 480 VAC time delay, 125 hp at 480 VAC time delay, 3 hp at 600 VAC standard fuse, 60 hp at 600 VAC standard fuse, 50 hp at 600 VAC time delay, 150 hp at 600 VAC time delay, 14 at 250 VDC horsepower rating