Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
content loaded
CANPLAS 102759 4IN X 1-1/2IN ABS DWV BUSHING
MFR Part #: 102759
SKU #: 1171810
Brand: Canplas®
UPC: 102759
Canplas® 102759 Bushing, 4 in Spigot x 1-1/2 in Hub, ABS, Black
For drainage and venting sections of the plumbing installation
CSA Certified | IAPMO Certified | MASS Approved | NSF Certified | UL Listed | UPC Certified
Product Details
Attributes
Features
Resources
Canplas® Bushing, Bushing Fitting, 4 in Connection Size 1, Connection Type 1: Spigot, 1-1/2 in Connection Size 2, Connection Type 2: Hub, Spigot|Hub Connection, ABS, Material Construction: ABS, Black, -40 to 80 deg F
Color:
Black
Connection Size 1:
4 in
Connection Size 2:
1-1/2 in
Connection Type:
Spigot|Hub
Connection Type 1:
Spigot
Connection Type 2:
Hub
Fitting Type:
Bushing
Material:
ABS
Material Construction:
ABS
Nominal Size:
4 x 1-1/2 in
Temperature Rating:
-40 to 80 deg F
- Installed in an ABS DWV piping system to provide a transition from a hub to an ABS DWV hub
- Spigot connection can be single step ABS solvent cemented to a 6 in ABS DWV hub
- Injection molded in durable ABS plastic
- Hand tighten lid plus a half turn provides a complete seal
- PTFE tape is recommended for threaded joints
Product Details
Canplas® Bushing, Bushing Fitting, 4 in Connection Size 1, Connection Type 1: Spigot, 1-1/2 in Connection Size 2, Connection Type 2: Hub, Spigot|Hub Connection, ABS, Material Construction: ABS, Black, -40 to 80 deg F
Attributes
Color: Black
Connection Size 1: 4 in
Connection Size 2: 1-1/2 in
Connection Type: Spigot|Hub
Connection Type 1: Spigot
Connection Type 2: Hub
Fitting Type: Bushing
Material: ABS
Material Construction: ABS
Nominal Size: 4 x 1-1/2 in
Temperature Rating: -40 to 80 deg F
Features
- Installed in an ABS DWV piping system to provide a transition from a hub to an ABS DWV hub
- Spigot connection can be single step ABS solvent cemented to a 6 in ABS DWV hub
- Injection molded in durable ABS plastic
- Hand tighten lid plus a half turn provides a complete seal
- PTFE tape is recommended for threaded joints