ALTATECH D-26F THERMOSTAT DIGITAL LCD SCREEN W/FLOOR SENSOR
Product Details
Attributes
Features
Resources
Azel Technologies Non-Programmable Digital Thermostat, 24 VAC, 50/60 Hz, On/Off Switch, 16 A Contact Rating, LCD with Backlight Display, 0.5 deg F, 1 deg F, 1.5 deg F, 2 deg F Differential Temperature, 32 to 140 deg F, +/-1 deg F Accuracy, 91.5 mm L x 80.3 mm W x 30 mm D
D-26F digital thermostat is specifically designed for Radiant Floor Heating Systems. It is very simple to install and operate without any programming steps. A 10 ft. auxiliary remote sensor is provided to measure and control the slab temperature. In addition, an on/off switch can be used to turn off the relay output. Set point and floor temperature or room temperature is displayed on the LCD screen with backlit.
- Large LCD with backlighting for displaying set point and floor temperature or room temperature
- Slab temperature control for radiant floor heating systems
- Low voltage (24 VAC) system
- Reliable digital electronic accuracy
- No leveling required
- Contains no mercury, environmentally safe
- Only two wires needed to power thermostat, no need to change battery in the future
- Selectable display in deg F or deg C
- EEPROM for setting backup
- On/off switch to shut off relay output
- Built-in digital control system
- Supplied with 10 ft floor sensor
Product Details
Azel Technologies Non-Programmable Digital Thermostat, 24 VAC, 50/60 Hz, On/Off Switch, 16 A Contact Rating, LCD with Backlight Display, 0.5 deg F, 1 deg F, 1.5 deg F, 2 deg F Differential Temperature, 32 to 140 deg F, +/-1 deg F Accuracy, 91.5 mm L x 80.3 mm W x 30 mm D
D-26F digital thermostat is specifically designed for Radiant Floor Heating Systems. It is very simple to install and operate without any programming steps. A 10 ft. auxiliary remote sensor is provided to measure and control the slab temperature. In addition, an on/off switch can be used to turn off the relay output. Set point and floor temperature or room temperature is displayed on the LCD screen with backlit.
Attributes
Features
- Large LCD with backlighting for displaying set point and floor temperature or room temperature
- Slab temperature control for radiant floor heating systems
- Low voltage (24 VAC) system
- Reliable digital electronic accuracy
- No leveling required
- Contains no mercury, environmentally safe
- Only two wires needed to power thermostat, no need to change battery in the future
- Selectable display in deg F or deg C
- EEPROM for setting backup
- On/off switch to shut off relay output
- Built-in digital control system
- Supplied with 10 ft floor sensor