DESERT SPRING DS-PFT PULSE FLOW-THROUGH HUMIDIFIER
Product Details
Attributes
Features
Resources
Desert Spring® Products Pulse Flow-Through Humidifier, 24 VAC, 60 Hz, 9-1/4 in W x 8-1/4 in H Plenum Opening, 13 gpd Capacity, 3000 sq-ft Coverage Area, 6 in Dia Bypass, 13-1/4 in W x 10 in H x 11-1/2 in D
The patented water-saving pulse flow control (US 6,354,572, CA 2,313,402) reduces the flow of water to the evaporative panel by 88% compared to standard flow through humidifiers. Ordinary flow through humidifiers without water metering technology can send up to 90% of water fed to the humidifier down the drain. The pulse control opens the water valve to soak the evaporative panel for 3 to 4 s. Upon saturation, the water valve is closed for 30 s to allow the water to evaporate without the waste of excess water flowing down the drain. This saves water without compromising performance, while maintaining all the benefits of flow through design. By restricting the water flow, the evaporative panel temperature is higher than ordinary flow through units. Higher surface temperature promotes evaporation, which means more humidity with less water. The humidifier includes anti water hammer device to protect against the potential of water-hammer from on/off water cycling.
- Large replaceable filter pad is encased in a disposable frame designed to retain water during the quenching cycle which further reduces wasted run-off water
- Quiet and reliable operation of DCV solenoid valve is further enhanced by section of engineered rubber hose to absorb potential water hammer shock
- The electronic water flow controller limits the amount of waste water which also reduces energy loss from furnace heat which is no longer transferred to the excess flow-through water normally lost down the drain
- Universal mounting capability
- Lightweight, compact design
- Comes complete with installation kit and humidistat control
Product Details
Desert Spring® Products Pulse Flow-Through Humidifier, 24 VAC, 60 Hz, 9-1/4 in W x 8-1/4 in H Plenum Opening, 13 gpd Capacity, 3000 sq-ft Coverage Area, 6 in Dia Bypass, 13-1/4 in W x 10 in H x 11-1/2 in D
The patented water-saving pulse flow control (US 6,354,572, CA 2,313,402) reduces the flow of water to the evaporative panel by 88% compared to standard flow through humidifiers. Ordinary flow through humidifiers without water metering technology can send up to 90% of water fed to the humidifier down the drain. The pulse control opens the water valve to soak the evaporative panel for 3 to 4 s. Upon saturation, the water valve is closed for 30 s to allow the water to evaporate without the waste of excess water flowing down the drain. This saves water without compromising performance, while maintaining all the benefits of flow through design. By restricting the water flow, the evaporative panel temperature is higher than ordinary flow through units. Higher surface temperature promotes evaporation, which means more humidity with less water. The humidifier includes anti water hammer device to protect against the potential of water-hammer from on/off water cycling.
Attributes
Features
- Large replaceable filter pad is encased in a disposable frame designed to retain water during the quenching cycle which further reduces wasted run-off water
- Quiet and reliable operation of DCV solenoid valve is further enhanced by section of engineered rubber hose to absorb potential water hammer shock
- The electronic water flow controller limits the amount of waste water which also reduces energy loss from furnace heat which is no longer transferred to the excess flow-through water normally lost down the drain
- Universal mounting capability
- Lightweight, compact design
- Comes complete with installation kit and humidistat control