RACK-A-TIERS CC9024 CABLE CHASE
Product Details
Attributes
Features
Resources
RACK-A-TIERS® Cable Chase Wire Bracket, 2-1/2 in H x 6-3/8 in W x 1-1/8 in D, Additional Information: 1 in Dia Hole
The cable chase is designed to provide a straight, clean path for wires with no obstructions. The brackets allow you to greatly reduce friction and stress on wires being pulled through the holes due to the hole design. Using the cable chase instead of drilling holes will greatly reduce the damage to floor joists, LVL's and manufactured wood. It will also provide less opportunity for the wire to become damaged because of crookedly drilled holes, sharp wooden edges or wooden splinters. The easiest and safest way to route wire and cable. Reduces labor, equipment and is expandable upon in the future.
- Follows the same guidelines as typical wire fill calculation
- Leaves room for future expansion
- Maximum distance between each CC under floor joists is 16 in (when using under floor joists, the maximum distance, on one side from any wall, joist, pipe or ductwork is 12 in)
- Maximum distance between each CC along floor joists is 30 in
- Maximum distance between each CC above ceiling joists is 24 in
- Wire fill per hole - no more than (3) of 14-2, 14-3, 12-2, 12-3 Romex, no more than (2) of 10-2, 10-3, 8-2, 6-2 Romex, no more than (1) of 8-3, 6-3 Romex and any SER up to #2, unlimited low voltage, data, phone, cable
Product Details
RACK-A-TIERS® Cable Chase Wire Bracket, 2-1/2 in H x 6-3/8 in W x 1-1/8 in D, Additional Information: 1 in Dia Hole
The cable chase is designed to provide a straight, clean path for wires with no obstructions. The brackets allow you to greatly reduce friction and stress on wires being pulled through the holes due to the hole design. Using the cable chase instead of drilling holes will greatly reduce the damage to floor joists, LVL's and manufactured wood. It will also provide less opportunity for the wire to become damaged because of crookedly drilled holes, sharp wooden edges or wooden splinters. The easiest and safest way to route wire and cable. Reduces labor, equipment and is expandable upon in the future.
Attributes
Features
- Follows the same guidelines as typical wire fill calculation
- Leaves room for future expansion
- Maximum distance between each CC under floor joists is 16 in (when using under floor joists, the maximum distance, on one side from any wall, joist, pipe or ductwork is 12 in)
- Maximum distance between each CC along floor joists is 30 in
- Maximum distance between each CC above ceiling joists is 24 in
- Wire fill per hole - no more than (3) of 14-2, 14-3, 12-2, 12-3 Romex, no more than (2) of 10-2, 10-3, 8-2, 6-2 Romex, no more than (1) of 8-3, 6-3 Romex and any SER up to #2, unlimited low voltage, data, phone, cable