LITHONIA 122H7H 6 AIR-TIGHT IC/NON-IC REMODEL HSG L7XR R6
Product Details
Attributes
Features
Resources
Lithonia Lighting®, L7XR R6, Downlight Housing, Airtight Contractor Select, Series: L7XR, 120 VAC, 6-7/8 in Ceiling Opening, E26 Incandescent Lamp, 26/42 W Lamp, 1 Lamps, IC/Non-IC Insulation, Ceiling Mounting, For Use With: REALITY™ ENERGY STAR® (ESL) Open Narrow Flange LED Module/P Series Open and Baffle Wide Flange LED Module, 6 in Diameter, 22-1/4 in Height, 11 in Width, 13 in Depth, Steel Housing Material, Nickel
The 6" Incandescent Remodel Housing is intended for use with recessed incandescent housings for 2x8 remodel construction. The housings are approved for direct burial in insulation and all ceiling and wiring types. Housing is constructed of air-tight aluminum with heavy-gauge galvanized steel raceway arm.
- Digital PIR excellent RF immunity
- Green LED status indicator
- No field calibration or sensitivity adjustments required
- Suitable for indoor environments
- Push button programmable, adjustable time delays and multiple operating modes
- Time delay feature can be set for 30 seconds to 20 minutes
- 100-hour lamp burn-in timer mode
- 24 ft radial coverage when mounted at 9 ft; 7-15 ft mounting heights provide 16-36 ft radial coverage
- The Sensor Switch CM PDT 10 large motion ceiling mount sensor combines a low voltage sensor into a low profile design, making it perfect to mount directly to a ceiling tile or metallic grid.
- For rooms with obstructions, these sensors offer Passive Dual Technology (PDT), which combines Microphonics™ noise detection and passive infrared (PIR) motion detection
- Up to 14 sensors per power pack
- Recessed incandescent housings for 2x8 new construction
- Approved for direct burial in insulation and all ceiling and wiring types
- Air-tight aluminum housing with heavy-gauge galvanized steel raceway arm
- Aluminum housing with three remodel clips for installation in existing plaster, sheet rock or mechanical ceilings
Product Details
Lithonia Lighting®, L7XR R6, Downlight Housing, Airtight Contractor Select, Series: L7XR, 120 VAC, 6-7/8 in Ceiling Opening, E26 Incandescent Lamp, 26/42 W Lamp, 1 Lamps, IC/Non-IC Insulation, Ceiling Mounting, For Use With: REALITY™ ENERGY STAR® (ESL) Open Narrow Flange LED Module/P Series Open and Baffle Wide Flange LED Module, 6 in Diameter, 22-1/4 in Height, 11 in Width, 13 in Depth, Steel Housing Material, Nickel
The 6" Incandescent Remodel Housing is intended for use with recessed incandescent housings for 2x8 remodel construction. The housings are approved for direct burial in insulation and all ceiling and wiring types. Housing is constructed of air-tight aluminum with heavy-gauge galvanized steel raceway arm.
Attributes
Features
- Digital PIR excellent RF immunity
- Green LED status indicator
- No field calibration or sensitivity adjustments required
- Suitable for indoor environments
- Push button programmable, adjustable time delays and multiple operating modes
- Time delay feature can be set for 30 seconds to 20 minutes
- 100-hour lamp burn-in timer mode
- 24 ft radial coverage when mounted at 9 ft; 7-15 ft mounting heights provide 16-36 ft radial coverage
- The Sensor Switch CM PDT 10 large motion ceiling mount sensor combines a low voltage sensor into a low profile design, making it perfect to mount directly to a ceiling tile or metallic grid.
- For rooms with obstructions, these sensors offer Passive Dual Technology (PDT), which combines Microphonics™ noise detection and passive infrared (PIR) motion detection
- Up to 14 sensors per power pack
- Recessed incandescent housings for 2x8 new construction
- Approved for direct burial in insulation and all ceiling and wiring types
- Air-tight aluminum housing with heavy-gauge galvanized steel raceway arm
- Aluminum housing with three remodel clips for installation in existing plaster, sheet rock or mechanical ceilings