KIDDE P1275CA SMOKE ALARM TEST & HUSH HARDWIRE W/BATT B/U
Product Details
Attributes
Features
Resources
Kidde® Smoke Alarm, 120 VAC, 80 mA Power Source, 10 ft Detection, Ionization Sensor, Up to 24 Alarm Interconnection, 10 to 95 % Humidity, 0.5 to 0.98%/ft Sensitivity, LED Display, Quick-Connect Wiring, 40 to 100 deg F Operating, White, 12.5 cm Dia x 3.8 cm H Dimensions
This smoke alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smouldering fires) sooner than ionization alarms. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home.
- Ionization technology may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms
- 120 VAC interconnectable, will interconnect with up to 24 other devices (18 of which can be initiating), including smoke alarms (limit of 12), carbon monoxide and heat alarms
- 9 VDC battery backup (included) - provides continuous protection even during power outages
- Multi-function one button design
- Hush® feature temporarily silences nuisance alarms for approximately 9 minutes (smoke must be present before Hush® is activated)
- This alarm also has a low battery Hush® feature
- If the alarm is sounding a low battery warning chirp, you can silence this chirp for approximately 13 hr by pressing the Test/Hush® button
- Test feature simultaneously tests the unit electronics and verifies alarm operation
- Tamper resist feature tamper-resist locking pin deters from tampering or theft
- Quick connect plug with 6 in pigtails wiring
Product Details
Kidde® Smoke Alarm, 120 VAC, 80 mA Power Source, 10 ft Detection, Ionization Sensor, Up to 24 Alarm Interconnection, 10 to 95 % Humidity, 0.5 to 0.98%/ft Sensitivity, LED Display, Quick-Connect Wiring, 40 to 100 deg F Operating, White, 12.5 cm Dia x 3.8 cm H Dimensions
This smoke alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smouldering fires) sooner than ionization alarms. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home.
Attributes
Features
- Ionization technology may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms
- 120 VAC interconnectable, will interconnect with up to 24 other devices (18 of which can be initiating), including smoke alarms (limit of 12), carbon monoxide and heat alarms
- 9 VDC battery backup (included) - provides continuous protection even during power outages
- Multi-function one button design
- Hush® feature temporarily silences nuisance alarms for approximately 9 minutes (smoke must be present before Hush® is activated)
- This alarm also has a low battery Hush® feature
- If the alarm is sounding a low battery warning chirp, you can silence this chirp for approximately 13 hr by pressing the Test/Hush® button
- Test feature simultaneously tests the unit electronics and verifies alarm operation
- Tamper resist feature tamper-resist locking pin deters from tampering or theft
- Quick connect plug with 6 in pigtails wiring