Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
content loaded
ABB 05165 4/6 SLOT WIRING DUCT 40 X 60
MFR Part #: 05165
SKU #: 1037676
Brand: ABB | Ty-Duct®
UPC: 662019818498
Ty-Duct® 05165 Finger Wiring Duct, 4 to 6 mm Narrow Slot, 40 mm W 80 mm D, Thermoplastic
05304 40 mm Wiring Duct Cover
Industrial Applications
CSA File No. 077988 | EN 50085-2-3 | IMQ Certified | RINA Approved | UL Listed
Product Details
Attributes
Features
Resources
Ty-Duct®, 05165, Wiring Duct, Finger, 40 mm Width, 80 mm Depth, 2 m Length, Narrow Slot, 4 to 6 mm Slot, Thermoplastic, Gray
Color:
Gray
Country Of Origin:
ITALY
Depth:
80 mm
Length:
2 m
Material:
Thermoplastic
Slot Size:
4 to 6 mm
Slot Type:
Narrow
Type:
Finger
Width:
40 mm
- Double trimming line, one at the base of the ribs so that they can be removed by bending them outwards and one at the base of the lateral sides so that the edge can be cut when two wiring ducts are branched
- Cable holder moldings half-way up the straight section of the ribs in 80 and 100 mm high wiring ducts
- Controlled splaying of sides to ensure a perfect seal of the cover in the vertical sections and at high temperatures
- Resistant to acids, oils and greases
- No burr, rounded-off inner edges
- Plastic, insulating, shock-proof, self-extinguishing material in compliance with UL 94-V0 standard and resistant to abnormal heat and fire up to 960 deg C (glow wire test) in compliance with IEC 695-2-1 standard
- The ribs are cut using a special pressing process (rounding of the edges) producing wiring ducts completely free of burr and rough edges
- Designed to snap onto the Fix-O-Rapid special accessory, suitable to be fastened both to DIN rail and base plate
- The dimensions and resilience of the ribs ensure repeated splaying during cabling
- Smaller, higher number of fingers for more concise harnessing
- Finger design restricts wire from slipping along the edge - creates two or three
- New rib profile makes it easy to open and close the cover and guarantees that it clips on more safely
- Can be mounted on horizontal or vertical surfaces even when the cover is on the bottom
- Cover can be opened without having to use a special tool
Product Details
Ty-Duct®, 05165, Wiring Duct, Finger, 40 mm Width, 80 mm Depth, 2 m Length, Narrow Slot, 4 to 6 mm Slot, Thermoplastic, Gray
Attributes
Color: Gray
Country Of Origin: ITALY
Depth: 80 mm
Length: 2 m
Material: Thermoplastic
Slot Size: 4 to 6 mm
Slot Type: Narrow
Type: Finger
Width: 40 mm
Features
- Double trimming line, one at the base of the ribs so that they can be removed by bending them outwards and one at the base of the lateral sides so that the edge can be cut when two wiring ducts are branched
- Cable holder moldings half-way up the straight section of the ribs in 80 and 100 mm high wiring ducts
- Controlled splaying of sides to ensure a perfect seal of the cover in the vertical sections and at high temperatures
- Resistant to acids, oils and greases
- No burr, rounded-off inner edges
- Plastic, insulating, shock-proof, self-extinguishing material in compliance with UL 94-V0 standard and resistant to abnormal heat and fire up to 960 deg C (glow wire test) in compliance with IEC 695-2-1 standard
- The ribs are cut using a special pressing process (rounding of the edges) producing wiring ducts completely free of burr and rough edges
- Designed to snap onto the Fix-O-Rapid special accessory, suitable to be fastened both to DIN rail and base plate
- The dimensions and resilience of the ribs ensure repeated splaying during cabling
- Smaller, higher number of fingers for more concise harnessing
- Finger design restricts wire from slipping along the edge - creates two or three
- New rib profile makes it easy to open and close the cover and guarantees that it clips on more safely
- Can be mounted on horizontal or vertical surfaces even when the cover is on the bottom
- Cover can be opened without having to use a special tool