Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
content loaded
OATEY PVC250-G MASTERS PVC-PRO MEDIUM GREY CEMENT 237ML
MFR Part #:Â PVC250-G
SKU #:Â 1239906
Brand: Oatey | MASTERS®
UPC:Â 067001022639
MASTERS® PVC250-G Medium Body Fast Set Cement, 237 mL Container, Gray, For Use With On all schedules and classes of PVC pipe and fittings up to 6 in dia with interference fit
Potable Water, Pressure Pipe, Conduit And DWV Applications
ASTM D2564|NSF 14 for PW DWV and Sewer|IAPMO Listed|UL Greenguard Gold|ANSI 61 health effects requirements|Meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and Various Environmental Requirements
Product Details
Attributes
Features
Resources
MASTERS®, PVC250-G, Cement, Medium Body Fast Set, 237 mL Container, For Use With: On all schedules and classes of PVC pipe and fittings up to 6 in dia with interference fit, Gray, Solvent Odor/Scent, Composition: Tetrahydrofuran/Methyl Ethyl Ketone/Cyclohexanone/Acetone/Polyvinyl Chloride/Silica Amorphous/Fumed/Crystalline free, 40 to 110 deg F
Color:
Gray
Composition:
Tetrahydrofuran/Methyl Ethyl Ketone/Cyclohexanone/Acetone/Polyvinyl Chloride/Silica Amorphous/Fumed/Crystalline free
Container Size:
237 mL
Odor/Scent:
Solvent
Suitable For Use With:
On all schedules and classes of PVC pipe and fittings up to 6 in dia with interference fit
Temperature Rating:
40 to 110 deg F
Type:
Medium Body Fast Set
- Cut pipe ends square chamfer and clean pipe ends
- Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms it should be snug
- Use a suitable applicator at least 1/2 the size of the pipe diameter
- Clean and prepare pipe and fitting with a listed Cleaner or Primer where local code requires
- Apply a liberal coat of cement to pipe approximately the depth of the socket. Leave no uncoated surface
- Apply a coat of cement to the inside of the fitting avoid pooling or puddling of cement
- Apply a second coat of cement to the pipe
- Assemble parts quickly as cement must be in a fluid state when joining
- Push pipe fully into the fitting using a 1/4 turning motion until the pipe bottoms
- Hold pipe and fitting together for 30 seconds to prevent pipe push-out longer in lower temperatures
- Wipe off excess cement for a clean esthetic appearance
- Allow cement to fully cure before pressure testing. Longer cure times may be required at lower temperatures or for larger diameter piping
Product Details
MASTERS®, PVC250-G, Cement, Medium Body Fast Set, 237 mL Container, For Use With: On all schedules and classes of PVC pipe and fittings up to 6 in dia with interference fit, Gray, Solvent Odor/Scent, Composition: Tetrahydrofuran/Methyl Ethyl Ketone/Cyclohexanone/Acetone/Polyvinyl Chloride/Silica Amorphous/Fumed/Crystalline free, 40 to 110 deg F
Attributes
Color:Â Gray
Composition:Â Tetrahydrofuran/Methyl Ethyl Ketone/Cyclohexanone/Acetone/Polyvinyl Chloride/Silica Amorphous/Fumed/Crystalline free
Container Size:Â 237 mL
Odor/Scent:Â Solvent
Suitable For Use With:Â On all schedules and classes of PVC pipe and fittings up to 6 in dia with interference fit
Temperature Rating:Â 40 to 110 deg F
Type:Â Medium Body Fast Set
Features
- Cut pipe ends square chamfer and clean pipe ends
- Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms it should be snug
- Use a suitable applicator at least 1/2 the size of the pipe diameter
- Clean and prepare pipe and fitting with a listed Cleaner or Primer where local code requires
- Apply a liberal coat of cement to pipe approximately the depth of the socket. Leave no uncoated surface
- Apply a coat of cement to the inside of the fitting avoid pooling or puddling of cement
- Apply a second coat of cement to the pipe
- Assemble parts quickly as cement must be in a fluid state when joining
- Push pipe fully into the fitting using a 1/4 turning motion until the pipe bottoms
- Hold pipe and fitting together for 30 seconds to prevent pipe push-out longer in lower temperatures
- Wipe off excess cement for a clean esthetic appearance
- Allow cement to fully cure before pressure testing. Longer cure times may be required at lower temperatures or for larger diameter piping