SQUARE D QO115GFI PUSH-IN 15 AMP GROUND FAULT
Product Details
Attributes
Features
Resources
Square D™, QO115GFI, Class A Ground Fault Miniature Circuit Breaker, 120 VAC, 15 A, 60 Hz Frequency, 10 kA Interrupt, QO/100A Frame, Thermal/Magnetic Trip, 1 Pole, 1 ph, Pressure Plate Connection, 12 to 8 AWG, 14 to 8 AWG Wire, Plug-On Mounting, 40 deg C, 4.12 in H x 0.75 in W x 2.91 in D Dimensions
The ground fault sensor in a Qwik-Gard® GFCI continuously monitors the current flow in the load and neutral conductors. The sensor compares the current flow in all directions. If the current flowing back to the source is less than the current flowing out to the load, a ground fault exists. When the difference in current flow exceeds 6 mA, the sensor sends a signal to trip the GFCI. The trip will be indicated by the Visi-Trip® indicator and the operating handle will move to the center tripped position.
- Qwik-Gard® GFCIs provide the same branch circuit protection as standard QO™ circuit breakers
- They are longer than standard QO™ circuit breakers and thus require more gutter space
- Class A devices must trip at 6 mA of ground fault current and above and hold below 4 mA of ground fault current
- For use with QO™ load centers, NQOD panel boards/interiors and Speed-D® switchboard distribution panels
- 14 to 8 AWG Cu, 12 to 8 AWG Al wire
- Ground fault protecting class A 6 mA
- K-Curve trip
Product Details
Square D™, QO115GFI, Class A Ground Fault Miniature Circuit Breaker, 120 VAC, 15 A, 60 Hz Frequency, 10 kA Interrupt, QO/100A Frame, Thermal/Magnetic Trip, 1 Pole, 1 ph, Pressure Plate Connection, 12 to 8 AWG, 14 to 8 AWG Wire, Plug-On Mounting, 40 deg C, 4.12 in H x 0.75 in W x 2.91 in D Dimensions
The ground fault sensor in a Qwik-Gard® GFCI continuously monitors the current flow in the load and neutral conductors. The sensor compares the current flow in all directions. If the current flowing back to the source is less than the current flowing out to the load, a ground fault exists. When the difference in current flow exceeds 6 mA, the sensor sends a signal to trip the GFCI. The trip will be indicated by the Visi-Trip® indicator and the operating handle will move to the center tripped position.
Attributes
Features
- Qwik-Gard® GFCIs provide the same branch circuit protection as standard QO™ circuit breakers
- They are longer than standard QO™ circuit breakers and thus require more gutter space
- Class A devices must trip at 6 mA of ground fault current and above and hold below 4 mA of ground fault current
- For use with QO™ load centers, NQOD panel boards/interiors and Speed-D® switchboard distribution panels
- 14 to 8 AWG Cu, 12 to 8 AWG Al wire
- Ground fault protecting class A 6 mA
- K-Curve trip