Branch: 
Airdrie
Contact Us
About Us
Locationsmore info
Events
Careers
Showrooms
Showrooms
home
home
Brands
Services
Quick Order
Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
content loaded
DEWALT 02808-PWR Image 1

DEWALT 02808-PWR ZAMAC 1/4X1 MUSHROOM HEAD CARBON STEEL NAIL ANCHOR

MFR Part #: 02808-PWR
SKU #: 1285478
Brand: DeWALT®
UPC: 400051696038
Please note this item is discontinued (order fulfillment will depend on stock availability): DeWALT® Zamac Nailin® 02808-PWR Nail Anchor, 1/4 in Dia, 1 in OAL, Zamac Alloy Body Shell, Carbon Steel Pin, Mushroom Head
Roof Flashing, Mechanical Attachments, Brick Ties and Masonry Anchorage, Furring Strips, Electrical Fixtures and Maintenance
ASTM B 633, SC1, Type III (Fe/Zn5) | Federal GSA Specification Meets the proof load requirements of FF-S-325C, Group V, Type 2, Class 3, (superseded) and CID A-A 1925A, Type 1 (mushroom head) & Type 2 (flat head)

DeWALT® Zamac Nailin® Nail Anchor, 1/4 in Diameter, 1 in Overall Length, Zamac Alloy Body Shell, Carbon Steel Pin, Mushroom Head, 1/4 in Drill, 3/4 in Minimum Embedment Depth, 35/64 in W x 9/64 in H Head, Zinc Plated

The Zamac Nailin® is a nail drive anchor which has a body formed from zamac alloy. Drive nails are available in carbon or stainless steel. The anchor can be used in concrete, block, brick or stone. A corrosion-resistant zamac alloy is used to form the anchor body with either a mushroom or flathead. The anchor can be used for light duty, tamperproof applications. The anchor is not recommend for overhead, life safety or sustained tensile loading applications (see performance data section).

Product Details

DeWALT® Zamac Nailin® Nail Anchor, 1/4 in Diameter, 1 in Overall Length, Zamac Alloy Body Shell, Carbon Steel Pin, Mushroom Head, 1/4 in Drill, 3/4 in Minimum Embedment Depth, 35/64 in W x 9/64 in H Head, Zinc Plated

The Zamac Nailin® is a nail drive anchor which has a body formed from zamac alloy. Drive nails are available in carbon or stainless steel. The anchor can be used in concrete, block, brick or stone. A corrosion-resistant zamac alloy is used to form the anchor body with either a mushroom or flathead. The anchor can be used for light duty, tamperproof applications. The anchor is not recommend for overhead, life safety or sustained tensile loading applications (see performance data section).

Attributes

Diameter: 1/4 in
Drill Size: 1/4 in
Finish: Zinc Plated
Head Type: Mushroom
Minimum Embedment Depth: 3/4 in
Overall Length: 1 in
Body Shell Material: Zamac Alloy
Head Size: 35/64 in W x 9/64 in H
Pin Material: Carbon Steel

Features

  • General purpose anchoring
  • Installs in a variety of base materials
  • Roof Flashing
  • Mechanical Attachments

Resources

Specification Sheet