content loaded
ANCHORTEK QD-14 Image 1

ANCHORTEK QD-14 1/4 Q DECK CLIP

MFR Part #: QD-14
SKU #: 0085415
Brand: Victory Plastics & Anchors
UPC: 400000069913
Victory Plastics & Anchors QD-14 Q-Deck Hanger Clip, Aluminum, 226 to 314 lb Load

Victory Plastics & Anchors Q-Deck Hanger Clip, QD Series, 1/4 in Rod, 226 to 314 lb Load, #10 Bolt, Aluminum, 2-1/2 in L x 3/4 in W

The ATK Q-deck hanger is the only hanger on the market designed to suspend threaded rod from the Q-deck. It's the fastest, most economical way to hang plumbing pipe, light fixtures, sheet metal duct, display fixtures and more from a Q-deck. The Q-deck hanger eliminates unsightly holes chiseled or punched in the side of the Q-deck, weakening the deck. With the Q-deck hanger, you can keep damage to roof insulation to a minimum. The ATK Q-deck hanger can be used as a pre-insert in concrete when used on top of the deck, by threading the rod up 2-1/2 in and putting a hex knot on the rod, where there is concrete poured on top of the Q-deck. Lab tests on a 23 ga Q-deck with 10 x 3/4 in tek screws show the Q-deck slotted at the screws holes at 1130 lb on the bottom and 1570 lb on the top. Recommended loads at a 4:1 safety factor are 285 lb on the bottom and 390 lb on top.

Product Details

Victory Plastics & Anchors Q-Deck Hanger Clip, QD Series, 1/4 in Rod, 226 to 314 lb Load, #10 Bolt, Aluminum, 2-1/2 in L x 3/4 in W

The ATK Q-deck hanger is the only hanger on the market designed to suspend threaded rod from the Q-deck. It's the fastest, most economical way to hang plumbing pipe, light fixtures, sheet metal duct, display fixtures and more from a Q-deck. The Q-deck hanger eliminates unsightly holes chiseled or punched in the side of the Q-deck, weakening the deck. With the Q-deck hanger, you can keep damage to roof insulation to a minimum. The ATK Q-deck hanger can be used as a pre-insert in concrete when used on top of the deck, by threading the rod up 2-1/2 in and putting a hex knot on the rod, where there is concrete poured on top of the Q-deck. Lab tests on a 23 ga Q-deck with 10 x 3/4 in tek screws show the Q-deck slotted at the screws holes at 1130 lb on the bottom and 1570 lb on the top. Recommended loads at a 4:1 safety factor are 285 lb on the bottom and 390 lb on top.

Attributes

Bolt Size: #10
Dimensions: 2-1/2 in L x 3/4 in W
Load Capacity: 226 to 314 lb
Material: Aluminum
Rod Size: 1/4 in
Series: QD Series