BRITECH CDP-2 SNOW SENSOR CONTROL / DISPLAY PANEL

Britech Snow and Ice Melting Sensor Control, Wired Sensor, -40 to 185 deg F, Panel Display, 4.1 in L Overall, 1.8 in W Overall, 0.9 in H Overall, Suitable For Use With: DS-2B, DS-2C, DS-224, DS-5, DS-8, DS-8C and DS-824 Rain/Snow Sensor Controllers

The CDP-2 brings control and monitoring of your snow melt system indoors. No need to hope that the system has successfully triggered. 1 glance at the CDP-2 confirms it. The CDP-2 is compatible with the DS-2B, DS-2C, DS-224, DS-5 and DS-8, DS-8C, DS-824 rain/snow sensor controllers. The unit consists of an electronic printed circuit board mounted securely to a steel mounting plate. The overall dimensions of the CDP-2 are 4.1 x 1.8 x 0.9 in. The unit weighs 2.5 oz. The CDP-2 fits into a standard single gang or multi-gang electrical enclosure. Compatible self-threading mounting screws that fit both metal and plastic enclosures are included. The plate also has mounting holes for a rectangular "modular" cover plate, similar to the Leviton Decora® or Hubbell StyleLine™ Series. This allows the user to select a cover plate color and material that blends with the decor of the room. Wiring is performed by installing a CS-1 remote control/monitor cable into the companion snow sensor. If not ordered with the sensor this cable may be ordered with the CDP-2. A shielded 5 conductor cable is then installed between the snow sensor and the CDP-2. All signals between the units are very low voltage so no conduit or similar protection of the interconnect cable is required. The individual leads of the interconnect cable are then installed into the rear terminal block of the CDP-2 and the unit is ready for operation. The CDP-2 does not require batteries or an AC power connection. It is actually powered by parasitic voltage "stolen" from the snow sensor. Peak power consumption is only 3.5 mW. Operational temperature range for the electronic components is -40 to 85 deg C. Therefore, the CDP-2 can be installed indoors or outside with proper protection from the elements.