LUTRON MS-Z101-WH 0-10V DIMMER OCC SENSOR
Product Details
Attributes
Features
Resources
Lutron®, MS-Z101-WH, Occupancy Sensing Dimmer, 1-Pole Multi-Location, Series: Maestro®, 120 to 277 VAC, 8 A, Passive Infrared Sensor, 400 sq-ft Minor, 900 sq-ft Major Coverage, 180 deg Viewing, 10 s Time Delay, Fluorescent/LED Lamp, 50/60 Hz Response, Hardwire Connection, Manual On/Automatic Off/Automatic On/Automatic Off Control Output, NEMA WD7 Enclosure, Wall Mounting, 32 to 104 deg F, Plastic/Steel, White, 4-11/16 in H x 2-15/16 in W x 1-1/8 in D Dimensions
Lutron® Maestro® 0 to 10 VDC dimmer sensors are lighting controls with passive infrared sensors that automatically control the lights in an area. These sensors detect heat from occupants moving within an area to determine when the space is occupied. The M
- Works with a single standard mechanical 3 way switch or up to 9 companion switches (MA-AS or MSC-AS)
- Occupancy version can be set to auto-on/auto-off or manual on/auto-off
- Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached
- Controls 0 to 10 VDC electronic fluorescent ballasts or LED driver load types
- Selectable dimming curve- linear or square law
- Miswire and incompatible load alert
- Adjustable timeout (1, 5, 15, or 30 minutes)
- Advanced Maestro® dimmer features available (locked preset, fade-to-on, and fade-to-off, etc)
- Passive infrared motion detection with exclusive Lutron® XCT™ technology for fine motion detection
- On a single-tap, lights fade ON or OFF, on a double-tap, lights go to full ON
- Adaptive switching algorithm for extended relay life
- Off warning fades lights to off over a period of 10 seconds
- High, medium, low, minimum adjustable sensitivity level
- Controls up to 25 ballasts or drivers (IEC 60929 Annex E.2 requires the ballast/driver to limit the current draw to 2.0 mA maximum)
- High end trim and low end trim to adjust maximum and minimum light levels
- Smart ambient light detection (ALD)
- 180 deg sensor field-of-view, up to 30 ft x 30 ft (9 m x 9 m) 900 ft2 (81 m2) major motion coverage and 20 ft x 20 ft (6 m x 6 m) 400 ft2 (36 m2) minor motion coverage
- Adjustable settings for auto-on light level (occupied level) 100%, 50%, last light level, or locked preset light level
Product Details
Lutron®, MS-Z101-WH, Occupancy Sensing Dimmer, 1-Pole Multi-Location, Series: Maestro®, 120 to 277 VAC, 8 A, Passive Infrared Sensor, 400 sq-ft Minor, 900 sq-ft Major Coverage, 180 deg Viewing, 10 s Time Delay, Fluorescent/LED Lamp, 50/60 Hz Response, Hardwire Connection, Manual On/Automatic Off/Automatic On/Automatic Off Control Output, NEMA WD7 Enclosure, Wall Mounting, 32 to 104 deg F, Plastic/Steel, White, 4-11/16 in H x 2-15/16 in W x 1-1/8 in D Dimensions
Lutron® Maestro® 0 to 10 VDC dimmer sensors are lighting controls with passive infrared sensors that automatically control the lights in an area. These sensors detect heat from occupants moving within an area to determine when the space is occupied. The M
Attributes
Features
- Works with a single standard mechanical 3 way switch or up to 9 companion switches (MA-AS or MSC-AS)
- Occupancy version can be set to auto-on/auto-off or manual on/auto-off
- Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached
- Controls 0 to 10 VDC electronic fluorescent ballasts or LED driver load types
- Selectable dimming curve- linear or square law
- Miswire and incompatible load alert
- Adjustable timeout (1, 5, 15, or 30 minutes)
- Advanced Maestro® dimmer features available (locked preset, fade-to-on, and fade-to-off, etc)
- Passive infrared motion detection with exclusive Lutron® XCT™ technology for fine motion detection
- On a single-tap, lights fade ON or OFF, on a double-tap, lights go to full ON
- Adaptive switching algorithm for extended relay life
- Off warning fades lights to off over a period of 10 seconds
- High, medium, low, minimum adjustable sensitivity level
- Controls up to 25 ballasts or drivers (IEC 60929 Annex E.2 requires the ballast/driver to limit the current draw to 2.0 mA maximum)
- High end trim and low end trim to adjust maximum and minimum light levels
- Smart ambient light detection (ALD)
- 180 deg sensor field-of-view, up to 30 ft x 30 ft (9 m x 9 m) 900 ft2 (81 m2) major motion coverage and 20 ft x 20 ft (6 m x 6 m) 400 ft2 (36 m2) minor motion coverage
- Adjustable settings for auto-on light level (occupied level) 100%, 50%, last light level, or locked preset light level