ABB TG3225 400A 2P GD N1 240V FUSIBLE
Product Details
Attributes
Features
Resources
GE Spec-Setter™ Safety Switch, Fused General Duty, 240 VAC, 400 A, 50 hp, 3 ph, 50/60 Hz Frequency, 2 Pole, 3 Wires, 10 kA Short Circuit, Handle Actuator, Class H/J/K/R Insulation, NEMA 1 Enclosure, 3-Point/Self-Leveling Mounting, Line/Load Lug Terminal, 60/75 deg C, 21.6 in W x 8.7 in D x 49.44 in H Dimensions, Steel, Hot Dipped Galvanized/Powder Coated
Designed for residential and light commercial applications where duty is not severe. Listed to UL standard 98 enclosed and dead front switches. Suitable for use as service equipment when installed in accordance with the national electrical code certified to CSA standard C22.2 no 4-04 enclosed and dead front switches. meets or exceeds NEMA KS1 standard for enclosed switches, type GD. Fusible and non-fusible switches available (consult BuyLog for interrupt ratings). Quick-make, quick-break mechanism (30 to 200 A). 60/75 deg C conductor rating.
- Integral cover interlock on 30 to 200 A disconnects for added protection
- Highly visible On/Off label takes the guesswork out of safety and gives a clean, modern appearance
- Bright red handle is easy to see and easy to grip
- Direct drive, quick-make, quick-break mechanism "snaps" the contacts open and closed, providing positive On/Off indication while prolonging switch life
- Wide, unobstructed gutter and removable interior make wire pulling and lug connections quick and easy
- 3-point mounting pattern speeds installation and simplifies ganging in close quarters
- Plated stationary and movable contacts deliver reliability and long life
- Galvanized steel enclosure offers superior rust protection in outdoor applications, there's also a durable polyester powder coated finish
- Plated blades provide visible confirmation of contact position
- Suitable for class H, K, J or R fuses, where applicable
Product Details
GE Spec-Setter™ Safety Switch, Fused General Duty, 240 VAC, 400 A, 50 hp, 3 ph, 50/60 Hz Frequency, 2 Pole, 3 Wires, 10 kA Short Circuit, Handle Actuator, Class H/J/K/R Insulation, NEMA 1 Enclosure, 3-Point/Self-Leveling Mounting, Line/Load Lug Terminal, 60/75 deg C, 21.6 in W x 8.7 in D x 49.44 in H Dimensions, Steel, Hot Dipped Galvanized/Powder Coated
Designed for residential and light commercial applications where duty is not severe. Listed to UL standard 98 enclosed and dead front switches. Suitable for use as service equipment when installed in accordance with the national electrical code certified to CSA standard C22.2 no 4-04 enclosed and dead front switches. meets or exceeds NEMA KS1 standard for enclosed switches, type GD. Fusible and non-fusible switches available (consult BuyLog for interrupt ratings). Quick-make, quick-break mechanism (30 to 200 A). 60/75 deg C conductor rating.
Attributes
Features
- Integral cover interlock on 30 to 200 A disconnects for added protection
- Highly visible On/Off label takes the guesswork out of safety and gives a clean, modern appearance
- Bright red handle is easy to see and easy to grip
- Direct drive, quick-make, quick-break mechanism "snaps" the contacts open and closed, providing positive On/Off indication while prolonging switch life
- Wide, unobstructed gutter and removable interior make wire pulling and lug connections quick and easy
- 3-point mounting pattern speeds installation and simplifies ganging in close quarters
- Plated stationary and movable contacts deliver reliability and long life
- Galvanized steel enclosure offers superior rust protection in outdoor applications, there's also a durable polyester powder coated finish
- Plated blades provide visible confirmation of contact position
- Suitable for class H, K, J or R fuses, where applicable