Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
content loaded
AO SMITH DRE-12062083 DRE-120 6KW 208V 3PH WATER HEATER
MFR Part #:Â DRE-120-6 -208
SKU #:Â 0864701
Brand: AO Smith®
UPC:Â 0864701
AO Smith® DRE Series DRE-120-6 -208 Electric Water Heater, 119 gal, 20478 Btu/hr, 6 kW, 3 ph, 208 V
For commercial and industrial applications
AHRI Certified | ASME Specified | CSA Certified | UL Listed
Product Details
Attributes
Features
Resources
AO Smith® Electric Water Heater, DRE Series, 119 gal Capacity, 20478 Btu/hr, 6 kW, 25 gph Recovery Rate, 93.7 % Efficiency, 3 Elements, 2000 W Element Wattage, 16.7 A, 208 V, 60 Hz, 3 ph Phase, NPT Connection, 1-1/4 in Connection, 150 psi, Steel, Finish: Baked Enamel, 120 to 181 deg F, 62-1/4 in H x 29-1/2 in W, Incoloy® Element
Amperage Rating:
16.7 A
Heating Capacity:
20478 Btu/hr
Power Rating:
6 kW
Tank Capacity:
119 gal
Voltage Rating:
208 V
Connection Size:
1-1/4 in
Connection Type:
NPT
Dimensions:
62-1/4 in H x 29-1/2 in W
Efficiency:
93.7 %
Element Material:
Incoloy®
Element Wattage:
2000 W
Finish:
Baked Enamel
Frequency Rating:
60 Hz
Material:
Steel
Number of Elements:
3
Phase:
3 ph
Pressure Rating:
150 psi
Recovery Rate:
25 gph
Series:
DRE Series
Temperature Rating:
120 to 181 deg F
Water Heater Type:
Electric
- Designed for use as a recovery heater having its own storage tank
- Meets the standby loss requirements of the US department of energy and current edition of AHRAE/IES 90.1
- Energy efficiency per IEC 60379:2007 is 93.7%
- Heavy-duty medium watt density elements (three/immersion heater) have incoloy sheathing provide excellent protection against oxidation and scaling
- Glass lined tank, tank interior is coated with glass specially designed by A. O. Smith for water heater use
- Protects all elements, thermostats and internal wiring circuits against excess current flow, meets national electrical code requirements that non-ASME tanks must have internal fusing when current draw exceeds 48 A
- 208 V 3 ph delta, convertible from 3 ph to 1 ph (in field) and vice versa
- Terminal block is factory installed, just bring the service to heater and connect to block
- One temperature control (adjustable through a range of 120 to 181 deg F) and manual reset high-temperature cut-off per element, thermostat step control may be achieved by varying settings on individual temperature controls, located behind hinged control compartment door for quick and easy access
- Surface-mounted thermostats
- Simplified circuitry, color-coded for ease of service
- Two anode rods for maximum corrosion protection
- Cabinet has bonderized undercoat with baked enamel finish
- Bottom inlet and top outlet openings
- Brass drain valve
- CSA certified and ASME-rated T&P relief valve
- Single panel control box
- Foam insulation reduces costly heat loss
Product Details
AO Smith® Electric Water Heater, DRE Series, 119 gal Capacity, 20478 Btu/hr, 6 kW, 25 gph Recovery Rate, 93.7 % Efficiency, 3 Elements, 2000 W Element Wattage, 16.7 A, 208 V, 60 Hz, 3 ph Phase, NPT Connection, 1-1/4 in Connection, 150 psi, Steel, Finish: Baked Enamel, 120 to 181 deg F, 62-1/4 in H x 29-1/2 in W, Incoloy® Element
Attributes
Amperage Rating:Â 16.7 A
Heating Capacity:Â 20478 Btu/hr
Power Rating:Â 6 kW
Tank Capacity:Â 119 gal
Voltage Rating:Â 208 V
Connection Size:Â 1-1/4 in
Connection Type:Â NPT
Dimensions:Â 62-1/4 in H x 29-1/2 in W
Efficiency:Â 93.7 %
Element Material:Â Incoloy®
Element Wattage:Â 2000 W
Finish:Â Baked Enamel
Frequency Rating:Â 60 Hz
Material:Â Steel
Number of Elements:Â 3
Phase:Â 3 ph
Pressure Rating:Â 150 psi
Recovery Rate:Â 25 gph
Series:Â DRE Series
Temperature Rating:Â 120 to 181 deg F
Water Heater Type:Â Electric
Features
- Designed for use as a recovery heater having its own storage tank
- Meets the standby loss requirements of the US department of energy and current edition of AHRAE/IES 90.1
- Energy efficiency per IEC 60379:2007 is 93.7%
- Heavy-duty medium watt density elements (three/immersion heater) have incoloy sheathing provide excellent protection against oxidation and scaling
- Glass lined tank, tank interior is coated with glass specially designed by A. O. Smith for water heater use
- Protects all elements, thermostats and internal wiring circuits against excess current flow, meets national electrical code requirements that non-ASME tanks must have internal fusing when current draw exceeds 48 A
- 208 V 3 ph delta, convertible from 3 ph to 1 ph (in field) and vice versa
- Terminal block is factory installed, just bring the service to heater and connect to block
- One temperature control (adjustable through a range of 120 to 181 deg F) and manual reset high-temperature cut-off per element, thermostat step control may be achieved by varying settings on individual temperature controls, located behind hinged control compartment door for quick and easy access
- Surface-mounted thermostats
- Simplified circuitry, color-coded for ease of service
- Two anode rods for maximum corrosion protection
- Cabinet has bonderized undercoat with baked enamel finish
- Bottom inlet and top outlet openings
- Brass drain valve
- CSA certified and ASME-rated T&P relief valve
- Single panel control box
- Foam insulation reduces costly heat loss