MERSEN STXP208Y10 Y TYPE 1 100KA MAX SURGE 208/120V 3PH
Product Details
Attributes
Features
Resources
Mersen Surge Protective Device, Series: STXP, 208Y/120 VAC Electrical Rating, 50/60 Hz Frequency, 4 Wires, 200 kA Short Circuit, 100 kA Peak Surge Current, 20 kA Nominal Discharge, Modes of Protection: L-G/L-L/L-N/N-G, LED Indicator, 3 ph, Environmental Conditions: -40 to 85 deg C Operating Temperature, -40 to 85 deg C Storage Temperature, NEMA 4X Enclosure, Panel/Wall Mounting, Pre-Wire Terminal, Aluminum/Polycarbonate, 3.13 in W Dimensions
The Surge-Trap® type 1 STXP series offers advanced performance and features over the STXR series including higher surge capacity and phase LED status indicators. The STXP meets requirements for UL1449 Fourth Edition and has been designed for additional mounting flexibility including mounting feet and flush mount capability. The STXP features TPMOV® technology inside making it the safest product available. Installation can be done on the line or load side of a panel. The STXP is the perfect fit from service entrance all the way down to an important machine specific control panel.
- Designed with the industry leading MERSEN TPMOV® technology (internally fused)
- Enhanced 100 kA surge capacity for longer life and higher single impulse withstand
- LED status indicator (ON = Good, OFF = Replace) LED phase loss indicators (ON = Operational, OFF = maintenance Required)
- NEMA 4X enclosure for outdoor or indoor use
- Mounting hub and mounting feet for installation flexibility
- Pre-wired with 3 ft leads for easy installation
Product Details
Mersen Surge Protective Device, Series: STXP, 208Y/120 VAC Electrical Rating, 50/60 Hz Frequency, 4 Wires, 200 kA Short Circuit, 100 kA Peak Surge Current, 20 kA Nominal Discharge, Modes of Protection: L-G/L-L/L-N/N-G, LED Indicator, 3 ph, Environmental Conditions: -40 to 85 deg C Operating Temperature, -40 to 85 deg C Storage Temperature, NEMA 4X Enclosure, Panel/Wall Mounting, Pre-Wire Terminal, Aluminum/Polycarbonate, 3.13 in W Dimensions
The Surge-Trap® type 1 STXP series offers advanced performance and features over the STXR series including higher surge capacity and phase LED status indicators. The STXP meets requirements for UL1449 Fourth Edition and has been designed for additional mounting flexibility including mounting feet and flush mount capability. The STXP features TPMOV® technology inside making it the safest product available. Installation can be done on the line or load side of a panel. The STXP is the perfect fit from service entrance all the way down to an important machine specific control panel.
Attributes
Features
- Designed with the industry leading MERSEN TPMOV® technology (internally fused)
- Enhanced 100 kA surge capacity for longer life and higher single impulse withstand
- LED status indicator (ON = Good, OFF = Replace) LED phase loss indicators (ON = Operational, OFF = maintenance Required)
- NEMA 4X enclosure for outdoor or indoor use
- Mounting hub and mounting feet for installation flexibility
- Pre-wired with 3 ft leads for easy installation