RIDGID 53127 K3800 W/C46 & TOOLS
Product Details
Attributes
Features
Resources
RIDGID® Drum Drain Cleaning Machine Kit, 2 to 4 in Drain, 90 ft Maximum Run, 1/10 hp, 115 VAC, 2 A, 100 ft of 3/8 in Cable Drum, 240 rpm, Steel Housing, Autofeed® Control, 19 in L x 14 in W x 17 in H
The RIDGID® K-3800 drain cleaning machine will clean drain lines up to 4 in diameter and 100 ft in length. Drum provided with the machine holds up to 100 feet of 3/8 in cable or 90 ft of 1/2 in cable. An optional sink drum holds 50 ft of 5/16 in cable. Both drums include an inner drum to guard against cable flip over. Designed to clean sink lines, floor drains and roof vents. The drum is driven by a 1/10 hp universal series motor that has a grounded electrical system. An integral ground Fault Interrupter (GFCI) is built into the line cord and a pneumatic foot actuator provides on/off control of the motor. When the cable hits a blockage, the motor gears down automatically to provide more power and greater operator control. The cable is manually fed in and out of the drain. An optional auto feed is available that will advance or retract the cable. Drum tilt adjusts to provide proper cable feed angle. The cable has a quick change coupling system for connecting tools. The drum separates from the motor frame for two-hand transport.
- A powerful, easy to transport, versatile machine for cleaning indoor drains and requires minimal set up to clean sink lines, floor drains and roof vents
- Rugged, corrosion resistant molded cable drum won't dent or rust, the drum tilt adjusts for proper cable feed angle, inner-drum guards against cable flip over inside the drum
- Cable drum's quick-release and built-in hand-holds allow easy cable change and transport
- Maximum drum capacity is 100 ft of 3/8 in or 90 ft of 1/2 in continuous length cable
- Powerful 175 W universal motor spins cable at 240 rpm when cable hits blockage, motor gears down automatically to deliver more power and enhance operator control
- Tools connect to cable in seconds
- Heavy duty AUTOFEED® system
Product Details
RIDGID® Drum Drain Cleaning Machine Kit, 2 to 4 in Drain, 90 ft Maximum Run, 1/10 hp, 115 VAC, 2 A, 100 ft of 3/8 in Cable Drum, 240 rpm, Steel Housing, Autofeed® Control, 19 in L x 14 in W x 17 in H
The RIDGID® K-3800 drain cleaning machine will clean drain lines up to 4 in diameter and 100 ft in length. Drum provided with the machine holds up to 100 feet of 3/8 in cable or 90 ft of 1/2 in cable. An optional sink drum holds 50 ft of 5/16 in cable. Both drums include an inner drum to guard against cable flip over. Designed to clean sink lines, floor drains and roof vents. The drum is driven by a 1/10 hp universal series motor that has a grounded electrical system. An integral ground Fault Interrupter (GFCI) is built into the line cord and a pneumatic foot actuator provides on/off control of the motor. When the cable hits a blockage, the motor gears down automatically to provide more power and greater operator control. The cable is manually fed in and out of the drain. An optional auto feed is available that will advance or retract the cable. Drum tilt adjusts to provide proper cable feed angle. The cable has a quick change coupling system for connecting tools. The drum separates from the motor frame for two-hand transport.
Attributes
Features
- A powerful, easy to transport, versatile machine for cleaning indoor drains and requires minimal set up to clean sink lines, floor drains and roof vents
- Rugged, corrosion resistant molded cable drum won't dent or rust, the drum tilt adjusts for proper cable feed angle, inner-drum guards against cable flip over inside the drum
- Cable drum's quick-release and built-in hand-holds allow easy cable change and transport
- Maximum drum capacity is 100 ft of 3/8 in or 90 ft of 1/2 in continuous length cable
- Powerful 175 W universal motor spins cable at 240 rpm when cable hits blockage, motor gears down automatically to deliver more power and enhance operator control
- Tools connect to cable in seconds
- Heavy duty AUTOFEED® system