Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
TEKMAR 003 24 VOLT RELAY
Product Details
Attributes
Features
Resources
Tekmar®, 003, Relay, 2.7/2.3 VA Power, 50/60 Hz Frequency, 24 V AC Coil, 2 Form C DPDT Contact Form, 10 mA at 1 VDC Contact, 2 Pole, LED Display, 1-9/16 in W x 2-3/8 in D x 3 in H Dimensions, Import
The Relay 003 is a 24 VAC coil DPDT (double pole double throw) relay that is used to isolate electrical loads and allow higher current ratings than the on board relays found on tekmar controls. It can be used in applications ranging from doubling the capability of a single output (e.g. energize a pump as well as provide a boiler demand from one output) to allowing a pump to be used that draws more than the control s specified relay rating. This product uses a 24 VAC coil that once energized, closes 2 normally open contacts, and opens 2 normally closed contacts.
- Double pole double throw relay (DPDT) to isolate electrical loads
- Easy to replace (ice cube style - no need to remove wiring)
- LED to indicate when energized
- Test button for easy test and manual override
- Isolate electrical loads
- Test tab for easy test and manual override
- Relay contacts (max.) - 10 A resistive at 250 VAC NO, NC, 10 A resistive at 30 VDC NO, NC, 7 A inductive at 250 VAC
- Relay contacts (min) - 10 mA 1 VDC
Product Details
Tekmar®, 003, Relay, 2.7/2.3 VA Power, 50/60 Hz Frequency, 24 V AC Coil, 2 Form C DPDT Contact Form, 10 mA at 1 VDC Contact, 2 Pole, LED Display, 1-9/16 in W x 2-3/8 in D x 3 in H Dimensions, Import
The Relay 003 is a 24 VAC coil DPDT (double pole double throw) relay that is used to isolate electrical loads and allow higher current ratings than the on board relays found on tekmar controls. It can be used in applications ranging from doubling the capability of a single output (e.g. energize a pump as well as provide a boiler demand from one output) to allowing a pump to be used that draws more than the control s specified relay rating. This product uses a 24 VAC coil that once energized, closes 2 normally open contacts, and opens 2 normally closed contacts.
Attributes
Features
- Double pole double throw relay (DPDT) to isolate electrical loads
- Easy to replace (ice cube style - no need to remove wiring)
- LED to indicate when energized
- Test button for easy test and manual override
- Isolate electrical loads
- Test tab for easy test and manual override
- Relay contacts (max.) - 10 A resistive at 250 VAC NO, NC, 10 A resistive at 30 VDC NO, NC, 7 A inductive at 250 VAC
- Relay contacts (min) - 10 mA 1 VDC